Engine Swaps and Clips FOR SALE!
10-28-2002, 10:59 AM
#1
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Engine Swaps and Clips FOR SALE!
Anyone need any JDM swaps or clips? Hit me up with a PM or Email.
S13 front clips start off at $2100 shipped.
Swaps are obviously cheaper.
Anyone need anything else?
S13 front clips start off at $2100 shipped.
Swaps are obviously cheaper.
Anyone need anything else?
10-28-2002, 11:14 AM
#2
Contributing Member
Join Date: Feb 2002
Location: NY
Posts: 1,841
I'm interested, but have a couple questions. Are the engines compression tested or leakdown tested? Any garauntees? When you say S13 does that mean blacktop clips too? Is it possible you can get the drive train (drive shaft, lsd, half shafts) with the clip?
10-28-2002, 11:51 AM
#3
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Originally posted by I'm with Stupid
I'm interested, but have a couple questions. Are the engines compression tested or leakdown tested? Any garauntees? When you say S13 does that mean blacktop clips too? Is it possible you can get the drive train (drive shaft, lsd, half shafts) with the clip?
I'm interested, but have a couple questions. Are the engines compression tested or leakdown tested? Any garauntees? When you say S13 does that mean blacktop clips too? Is it possible you can get the drive train (drive shaft, lsd, half shafts) with the clip?
10-28-2002, 10:38 PM
#4
Contributing Member
Join Date: Jul 2002
Location: buffalo,n.y.
Posts: 2,209
does this mean you can get basically any nissan front clip? what about panels?
10-29-2002, 08:24 AM
#5
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Originally posted by rudeboy
does this mean you can get basically any nissan front clip? what about panels?
does this mean you can get basically any nissan front clip? what about panels?
The panels may be damaged or missing. The reason most customers buy the clips is to get EVERYTHING within the engine bay. All hoses and wires. No guessing.
Nissan Fairlady 300ZX VG30DETT SWAP
2998cc quad cam
24-valve
V6
Twin Turbo
Power: 280hp @6400rpm
RWD 5-speed Transmission
Nissan Silvia CA18DET 89-91 SWAP
1809cc EFI DOHC
16-valve
4cyl
Turbo
Horse Power: 175hp @6400rpm
RWD
5-speed and 4-speed auto
OR
FWD 5-speed
Nissan Silvia S13 Sr20det Complete SWAP
I have Pulzar GTI-R , BlueBird , S13
1998cc EFI DOHC
16-valve
4cyl
Turbo
Horse Power: 205hp @6000rpm
5-speed Transmission
Nissan Silvia S13 SR20DET Complete Swap. Comes with ECU , Transmission, turbo manifold , intake manifold.
Nissan Silvia S13 SR20DET Front CLIP
1998cc EFI DOHC
16-valve
4cyl Turbo
Horse Power: 205hp @6000rpm
RWD
5-speed Transmission
Good condition less than 40,000km
HIGH QUALITY, won't regret. Turbo all goood condition
Nissan Silvia S14 SR20DET Front CLIP
No Bodykit. Just engine , transmission , wirings , ecu , They are tested and it's working perfectly. No damage to engine or transmission
Nissan Skyline RB26DETT Front CLIP GTR32 91++
2597cc EFI DOHC
24-valve
6cyl
Twin Turbo
Power: 280hp @6800rpm
4WD six-speed transmission
Good condition front clip
Email if you need pics.
Click here to get an idea of the prices. I will beat any price that I could.
10-29-2002, 08:25 AM
#6
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Originally posted by ChrisB
Click here to get an idea of the prices. I will beat any price that I could.
Click here to get an idea of the prices. I will beat any price that I could.
10-29-2002, 09:13 AM
#7
Contributing Member
Join Date: Feb 2002
Location: NY
Posts: 1,841
I know this s a bit off topic, but just out of curiosity could you get a Toyota clip? If you could I may consider gettin one later on and if you had a good price that'd be great.
10-29-2002, 10:53 AM
#8
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Originally posted by I'm with Stupid
I know this s a bit off topic, but just out of curiosity could you get a Toyota clip? If you could I may consider gettin one later on and if you had a good price that'd be great.
I know this s a bit off topic, but just out of curiosity could you get a Toyota clip? If you could I may consider gettin one later on and if you had a good price that'd be great.
10-29-2002, 01:15 PM
#9
Registered User
Join Date: Sep 2002
Location: Fredericksburg, VA
Posts: 352
ChrisB, how much can you get an SR20DET RED TOP, with the motor, 5spd tranny, ECU (UNCUT!), Harness, Turbo, all electronics and ignition parts?
10-29-2002, 01:37 PM
#10
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Originally posted by SilvaPwr
ChrisB, how much can you get an SR20DET RED TOP, with the motor, 5spd tranny, ECU (UNCUT!), Harness, Turbo, all electronics and ignition parts?
ChrisB, how much can you get an SR20DET RED TOP, with the motor, 5spd tranny, ECU (UNCUT!), Harness, Turbo, all electronics and ignition parts?
$2100, the clip is the best way to go.
That way you are guarenteed to get all the ignition parts.
10-29-2002, 02:11 PM
#11
Registered User
Join Date: Sep 2002
Location: Fredericksburg, VA
Posts: 352
Originally posted by ChrisB
For you?
$2100, the clip is the best way to go.
That way you are guarenteed to get all the ignition parts.
For you?
$2100, the clip is the best way to go.
That way you are guarenteed to get all the ignition parts.
10-29-2002, 02:23 PM
#12
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Perfectly understandable.
How long it takes for you to get it depends on the shipping method you want. And I'm 95% sure you need to have it delivered to a business address or shipping charges are higher.
My supplier has sever clips and swaps in stock and ready for delivery. These are coming from Japan, so it isn't going to come over night. I have had customers get them in as little as 2 weeks.
I have a locked price until at least the middle of Novemeber.
My supplier and I will be re-nogotiating prices after that.
Also, I have what everyone knows as Group Buy rates, If I request (and pay for) 10 engines at a time I get a % off.
I enjoy the questions, so if you or anyone else has any, please ask.
How long it takes for you to get it depends on the shipping method you want. And I'm 95% sure you need to have it delivered to a business address or shipping charges are higher.
My supplier has sever clips and swaps in stock and ready for delivery. These are coming from Japan, so it isn't going to come over night. I have had customers get them in as little as 2 weeks.
I have a locked price until at least the middle of Novemeber.
My supplier and I will be re-nogotiating prices after that.
Also, I have what everyone knows as Group Buy rates, If I request (and pay for) 10 engines at a time I get a % off.
I enjoy the questions, so if you or anyone else has any, please ask.
10-29-2002, 02:48 PM
#13
Registered User
Join Date: Sep 2002
Location: Fredericksburg, VA
Posts: 352
as little as 2 weeks, so whats the longest??
10-29-2002, 02:56 PM
#14
Registered User
Thread Starter
Join Date: Aug 2002
Location: Seymour, CT
Posts: 175
Originally posted by SilvaPwr
as little as 2 weeks, so whats the longest??
as little as 2 weeks, so whats the longest??
Due to checks clearing, and engine availability, I think it was an RB....
Doesn't happen often, but with any business, it does happen.
And if for any reason it should take longer then expected, which it shouldn't, (my supplier just sent out 13 within the last 2 weeks- that's why I feel my prices will go up) I will tell you if anything comes up.
10-29-2002, 03:39 PM
#15
Contributing Member
Join Date: Feb 2002
Location: NYC
Posts: 1,115
well i don't know about the rest of us. But I would seriously consider this but I am skeptical to this. Business in long for how long? and all the other good stuff that comes with that? Warranty (startup?) how do I contact you? credit cards accepted or just cash?
