tennessee members?
12-24-2004, 03:53 PM
#16
Registered User
Join Date: Nov 2004
Location: Claksville ,Tennesse
Posts: 228
Originally posted by bottombunk
im have to roll to clarksvegas and check out your crew.
im have to roll to clarksvegas and check out your crew.
12-24-2004, 07:54 PM
#17
Registered User
Join Date: Mar 2004
Location: Delaware, Ohio
Posts: 190
Hey rivneo1 I got alot of work to do on my car. I am thinking I am going to swap the motor but I have to wait till I get my taxes filled. And see how much I have to do it. I think I am going to swap in an rb20 since I have done it before. I was helping my buddy do an sr20 swap but he gave up and is selling the car to another buddy and I will be helping him out. As far as the car club thing me and my boyz are thinking of starting our own team. Just a couple of guy. But thanks for the invite.
12-26-2004, 01:58 PM
#18
Registered User
Join Date: Nov 2004
Location: Claksville ,Tennesse
Posts: 228
Originally posted by ruthless_S13
Hey rivneo1 I got alot of work to do on my car. I am thinking I am going to swap the motor but I have to wait till I get my taxes filled. And see how much I have to do it. I think I am going to swap in an rb20 since I have done it before. I was helping my buddy do an sr20 swap but he gave up and is selling the car to another buddy and I will be helping him out. As far as the car club thing me and my boyz are thinking of starting our own team. Just a couple of guy. But thanks for the invite.
Hey rivneo1 I got alot of work to do on my car. I am thinking I am going to swap the motor but I have to wait till I get my taxes filled. And see how much I have to do it. I think I am going to swap in an rb20 since I have done it before. I was helping my buddy do an sr20 swap but he gave up and is selling the car to another buddy and I will be helping him out. As far as the car club thing me and my boyz are thinking of starting our own team. Just a couple of guy. But thanks for the invite.
12-28-2004, 06:48 PM
#22
Registered User
Join Date: Dec 2004
Location: Gallatin, Tennessee
Posts: 41
Thanks, Not much has been done just this
-Auto-5spd conversion
-JDM S1 tranny
-Dynapack clutch
-shaved fly to 13lbs
-2 1/4 catback midas exaust with ES tuning muffler
-Yokohoma AVSES100
-MIM mesh wheels (10.4lbs, 38mm off, 14x6)
-New brakes all the way around OE spec
-New master cylender
-Dot 5 castol brake fluid (518 deg F boil
)
-B&M short shifter
-Bosch o2 sensor
-NGK R plugs, wires, ect
-Ignition advanced 2deg
-Repainted trim and mirrors factory colors
-mobil 1 oil with Mugen oil filter
-Kool blu accel air filter
-removed intake resonator
-2/ rebuilt factory spec axles
That is about it, Just do **** to keep it running. I only fix it if it's broke (bad auto and was going to cost $750 to fix, so I traded a VIS C/F hood for most of my **** for the conversion. ) Did have a carbon fiber hood and Tein basics, but a strut blew on them and I can't find a Single. I have to buy th set.
-Auto-5spd conversion
-JDM S1 tranny
-Dynapack clutch
-shaved fly to 13lbs
-2 1/4 catback midas exaust with ES tuning muffler
-Yokohoma AVSES100
-MIM mesh wheels (10.4lbs, 38mm off, 14x6)
-New brakes all the way around OE spec
-New master cylender
-Dot 5 castol brake fluid (518 deg F boil
)-B&M short shifter
-Bosch o2 sensor
-NGK R plugs, wires, ect
-Ignition advanced 2deg
-Repainted trim and mirrors factory colors
-mobil 1 oil with Mugen oil filter
-Kool blu accel air filter
-removed intake resonator
-2/ rebuilt factory spec axles
That is about it, Just do **** to keep it running. I only fix it if it's broke (bad auto and was going to cost $750 to fix, so I traded a VIS C/F hood for most of my **** for the conversion. ) Did have a carbon fiber hood and Tein basics, but a strut blew on them and I can't find a Single. I have to buy th set.
12-29-2004, 11:57 PM
#23
Contributing Member
Join Date: Sep 2004
Location: knoxville tn
Posts: 999
it has been a long time since i have been on these boards... im in knoxville and am working on putting the motor back into my 240... just did a rebuild of the ka24 that was in it for now... but since i have not gotten the motor in the car yet i might just do the sr swap since tax time is at hand... im cool with gettin together...
i bought my 240 from these boards and it is just what the owner told me it was... god i cant wait to hear it run... if any of you are in the knox area my email is stain13@hotmail.com we could get together and help eachother out...
i bought my 240 from these boards and it is just what the owner told me it was... god i cant wait to hear it run... if any of you are in the knox area my email is stain13@hotmail.com we could get together and help eachother out...
12-30-2004, 03:29 PM
#26
Contributing Member
Join Date: Sep 2004
Location: knoxville tn
Posts: 999
i guess it will be up for sale...new rings bearings cylenders honed rebuilt head new cam timing chain set new water pump starter and altenator and oil pump... i got like 500 into the motor and it aint even been started yet... guess i will sell it if anyone needs it... ka24e single overhead cam motor painted red and maroon...
01-14-2005, 02:03 PM
#28
Registered User
Join Date: Mar 2004
Location: Delaware, Ohio
Posts: 190
I need HELP!!! I just got another 240 today. I bought it from my buudy for 2500, he had started an sr swap. The wire harness he got with the motor was cut up so he got a replacement from HT. But he had to send in the old harness. I am now trying to figure out were all the plugs go. If there is any one that is in the area that has a sr20 240 that is willing to let me take a look at it so I can figure out the wire please let me know. Email me at ruthless_obsession12@yahoo.com
01-14-2005, 05:41 PM
#29
Contributing Member
Thread Starter
Join Date: Aug 2003
Location: murfreesboro,tn.
Posts: 526
what do you mean by where the plugs go? are you asking where to plug them up or are you asking about which pins to relocate? whichever you need, if you can wait a couple weeks ill come down and help you wire it up. im just doing inventory at work right now so its long hours and hard to get down there.
01-14-2005, 06:16 PM
#30
Registered User
Join Date: Mar 2004
Location: Delaware, Ohio
Posts: 190
No I am trying to figur out where they plug to. It's a new wire harness, and I have to rerun it. At thats were I am lost at. I am going to work on it Sunday. Hope I can figure it out so I can have it running by Monday night. And your more than welcome to come hang out at any time.