s13 Redtop swap
 

Hello everyone my name is Bruce im new to the board. I have a few questions before i start ripping the ka24de motor out of my 92 240 Coupe and put a Redtop sr20 in it. I was told that the swap is kind of complicated. I know so far that i have to extend the maf sensor wires and the o2 wire i was also told that i will need to use a different fuse box and a different plug from under the dashboard into to ecu . so far i have a place to pic my motor out from and no its not jdmeninescorp they suck. but when i do get the motor i know that it comes with an uncut wire harness and maf and ignitor chip i also am getting a fuel pump intercooler kit and bov. I will also go with a 3inch downpipe to 3inch exhaust. i just need to know what i have to do to make this motor work as far as wireing goes do i need to change that plug from the dash to the ecu and do i need to change the fuse box. any help will be apreceated thanks guys

sup i'm doing the same thing your ahead of me but this may help a little

link http://www.superstreetonline.com/howto/3430/

here is a good source of sr parts,they help me out with some tech on swaps before,i hope this help....... http://stores.ebay.com/askme4parts_W...QQftidZ2QQtZkm

heavythrottle.com has a pretty good how-to