</3er *Henry's S12-----IT RUNS IT RUNS(start up video pg.90)
04-01-2010, 08:12 PM
#1548
Registered User
Join Date: Sep 2004
Location: Alpharetta, GA
Posts: 1,684
Majora's Mask . . .I'm a Zelda die hard fan, I can rattle off BOTH timelines . . .verbatim, by heart . . .ugh . . .I love that series . . .
AANNNYYYWAY!
Your car + my ***** = more awesome than the internet can handle . . .so we will have to forgo that and just have your car continue to be listed.
CAN WE HAZ MORE DRUFTZ PHOTZ PLOX?
AANNNYYYWAY!
Your car + my ***** = more awesome than the internet can handle . . .so we will have to forgo that and just have your car continue to be listed.
CAN WE HAZ MORE DRUFTZ PHOTZ PLOX?
04-05-2010, 04:00 PM
#1549
Contributing Member
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: San Francisco, CA
Posts: 501
Haha thanks dude! I've got an event coming up june 4, so in time!
DIGIDASH AND TACH ARE WORKING WITH KA24DE NOW!
video of tach here
http://www.youtube.com/watch?v=kgS446sNIr0
and new front tires
DIGIDASH AND TACH ARE WORKING WITH KA24DE NOW!
video of tach here
http://www.youtube.com/watch?v=kgS446sNIr0
and new front tires
04-05-2010, 04:29 PM
#1550
Registered User
Join Date: Mar 2008
Location: Oklahoma
Posts: 126
Hey Henry did i miss something in your blog i just seen you and yuta in stupid street haha. Im an s3 kinda guy but ss keeps sending me mags that i dont pay for so i opened it up and seen you in there fliped the page and seen him. it was nice to see something worth reading in there
04-12-2010, 09:21 PM
#1551
Contributing Member
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: San Francisco, CA
Posts: 501
Haha, yeah. that sorta just happened. thanks man!
another digidash video
http://www.youtube.com/watch?v=nfSa3VGYolM
Tires are mounted and they are super nice!
The 2.5in 2x muffler exhaust is going well too, it's practically all done. I just need to paint it and finish making the end pipe. It isn't anywhere as quiet as I had hoped, but it'll do. First time making an exhaust alone and it just took forever; I spent so much time on it. I tried to make it as close to the body as possible so there are some weird bends in there. I used 2 magnaflow xl3's, two 2.5in U bends, 5ft of 2.5in, and random metal for the brackets. Made everything from the downpipe back
downpipe
I made a mount out of bed frame, little did I know that this was tempered steel and it destroyed 3 drill bits
forged in mordor
mock and fitting
over rear subframe
cool guy hangers
pipe that goes over subframe, straight section at the end for the slip-joint
another digidash video
http://www.youtube.com/watch?v=nfSa3VGYolM
Tires are mounted and they are super nice!
The 2.5in 2x muffler exhaust is going well too, it's practically all done. I just need to paint it and finish making the end pipe. It isn't anywhere as quiet as I had hoped, but it'll do. First time making an exhaust alone and it just took forever; I spent so much time on it. I tried to make it as close to the body as possible so there are some weird bends in there. I used 2 magnaflow xl3's, two 2.5in U bends, 5ft of 2.5in, and random metal for the brackets. Made everything from the downpipe back
downpipe
I made a mount out of bed frame, little did I know that this was tempered steel and it destroyed 3 drill bits
forged in mordor
mock and fitting
over rear subframe
cool guy hangers
pipe that goes over subframe, straight section at the end for the slip-joint
04-13-2010, 02:24 AM
#1553
Contributing Member
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: San Francisco, CA
Posts: 501
they were only about 69 bucks each for 15's, gets more and more expensive going up though. I'm a bit sad that the tires are square on my front wheels but I just gotta deal until i get wider fronts.
The exhaust is done! Compared to the old, incredibly loud 3in, I just wanted a quiet, less flashy exhaust. So I spent like a week working on this stupid thing, **** always takes a long time when you've got all the wrong tools. Building an entire exhaust while laying on the ground and having the car barely high enough to be under isn't the bee's knees.
The whole exhaust is 4 pieces, the downpipe, center muffler, over subframe pipe, and the end muffler; tucked up as much as I could. It isn't nearly as quiet as I was hoping for, but way better than before while still sounding burbly from the unequal length header.
Looks like something I bought after the paint! The down pipe isn't pictured here, it was already mounted
The exhaust is done! Compared to the old, incredibly loud 3in, I just wanted a quiet, less flashy exhaust. So I spent like a week working on this stupid thing, **** always takes a long time when you've got all the wrong tools. Building an entire exhaust while laying on the ground and having the car barely high enough to be under isn't the bee's knees.
The whole exhaust is 4 pieces, the downpipe, center muffler, over subframe pipe, and the end muffler; tucked up as much as I could. It isn't nearly as quiet as I was hoping for, but way better than before while still sounding burbly from the unequal length header.
Looks like something I bought after the paint! The down pipe isn't pictured here, it was already mounted
04-18-2010, 09:31 PM
#1555
Contributing Member
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: San Francisco, CA
Posts: 501
Since the ghetto tension rod bracket I made out of the s12 bracket didn't work(rod couldn't reach), I had to get those s14 brackets. Pretty surprising, 3/4 holes directly line up and one hole just needed to be ovaled out.
exhaust is on, lots of mixed opinions about this compared to the old blast pipes, but I'm stoked on it!
exhaust is on, lots of mixed opinions about this compared to the old blast pipes, but I'm stoked on it!
