Engin swaps for 240 VS 300 2+2
I'm starting this thread to see what is going to be better, to do work to a 240 or a 300z 2+2. The reason I'm asking is because I'd like to have the 300 because of insurance costs (Seeing how the 2+2 has a "back seat") any suggestions would be helpful
|
Last time I looked 240's had a backseat...
|
Originally posted by s13 240 Last time I looked 240's had a backseat... |
The 240sx is definitely better on insurance than the 300zx. They both have back seats, but the seats really aren't that usable because of how little leg room there is. The 300zx is bigger and has more power, so it is going to have a higher insurance rate than the 240.
|
300 engine bays suck...too damn cramped
|
+1
dual head = dual worries |
thanks for the replies all, I never looked, I was told that the 240 was a 2 seater (guess I should check for myself next time!!!)
Ok, so the second part of my dumb question LOL What is the the best overall swap, the sr20 or the R34TT swap???? |
depends on your goals. its all mostly opinion anyways.
|
240's all definitely have rear seats, some 300zx's are only two seaters though. If you have a big enough bank account to handle the RB26DETT swap and know what will all be involved go for it, otherwise stop thinking about it. Why even swap?
|
Originally posted by s13 240 240's all definitely have rear seats, some 300zx's are only two seaters though. If you have a big enough bank account to handle the RB26DETT swap and know what will all be involved go for it, otherwise stop thinking about it. Why even swap? |
1 Attachment(s)
Originally posted by s13 240 Last time I looked 240's had a backseat... |
Why swap? Good question, her is a complicated answer. My brother has a Civic DX with a b-18 swap done to it and he likes to goto the drags down in MD. well, I've kind of been bitten with the racing bug (so to speak) and I'd like to go down with them in my own car. Watching someone else race sux.... anyway I've been talking to my bro and he has me talked into one of 2 things
1: Doing a buildup on an Integra K20 and making it a turbo OR 2: Building up a 240sx and doing a SR20det or the Skyline swap to get the Twin turbo. The probelm I have with the Integra build up is being a rear wheel drive dind of guy I dislike FF cars and I'd like to learn to drift, so that kind of leaves out the Integra I would really like to build the TT so, that is what I've been checking into. as for cost? I have a quote for the entire front clip of the R34 to be shipped (they stand behind it if a garage installs it) $4500+$700 or $800 shipping |
Originally posted by Cueball Why swap? Good question, her is a complicated answer. My brother has a Civic DX with a b-18 swap done to it and he likes to goto the drags down in MD. well, I've kind of been bitten with the racing bug (so to speak) and I'd like to go down with them in my own car. Watching someone else race sux.... anyway I've been talking to my bro and he has me talked into one of 2 things 1: Doing a buildup on an Integra K20 and making it a turbo OR 2: Building up a 240sx and doing a SR20det or the Skyline swap to get the Twin turbo. The probelm I have with the Integra build up is being a rear wheel drive dind of guy I dislike FF cars and I'd like to learn to drift, so that kind of leaves out the Integra I would really like to build the TT so, that is what I've been checking into. as for cost? I have a quote for the entire front clip of the R34 to be shipped (they stand behind it if a garage installs it) $4500+$700 or $800 shipping |
Originally posted by Cueball I have a quote for the entire front clip of the R34 to be shipped (they stand behind it if a garage installs it) $4500+$700 or $800 shipping Thats all just a rough estimate pretty much off the top of my head. It is an expensive swap and if you can afford to spend over $12,000 on swapping a stock engine into your car more power to you. If you wanna upgrade anything its gonna cost, and if anything would ever go wrong how many advanced auto parts stores carry RB26 parts? None that I know of. If your looking to have something because you want twin turbo, go Z32. It'll save you money and parts are more readily available in the US. My $0.02 |
Thanks for the imput guys I don't want you to think that your words are in vain, I am taking all of this into consideration!!! I'm just trying to get a baseplan set up so I know what I need to do and how much I need when I start this buildup. Hopefuly I wont fall on my face too much while doing this
|
All times are GMT -7. The time now is 01:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands