Off-Topic Anything Non-Related to the above topics.

fix my car or just f**k it.

Old 03-05-2008, 04:58 PM
  #1  
Registered User
Thread Starter
 
soul strong's Avatar
 
Join Date: Apr 2007
Location: chicago
Posts: 37
fix my car or just f**k it.

hello, i know i dont talk much on the forums, but im on often. just dont have anything to say.
but know i have a question. i have a 1990 240sx SE fastback. i always wanted a turbo car, so i was gonna swap a sr20det like most people do and upgrade brakes, suspension, and tighten up the chassis. but i been thinking the amount of time and money that would have to be put into this, i could put a nice down payment on a newer car. the car i had in mind was a 350z. with the power goals of 350 hp in a 240sx i figure i could pull that much out a 350z with some simple bolt ons. i know the 350z would cost more but less milage and better control? plus i like how wide they look. so the question could be what would u do. or in your opinion which do you think would be better. on a side note i also want to put a sound system. i dont want to get all crazy with fiberglass and huge speakers, just a nice mellow sound kit that has a stock look and great sound. i understand with a sub i wont be able to get a "stock" look but you know, nothing out the ordinary.

feedback please.
and flaming not welcome i understand this is a 240sx forum and everyone would say 240 is the best. but i want honest opinions.
soul strong is offline  
Old 03-05-2008, 05:06 PM
  #2  
Registered User
 
94Boy's Avatar
 
Join Date: Jan 2008
Location: PA
Posts: 456
I would do a Fast 240.Just because If you get a 350 it would be stock. 2nd You wold have a really nice 240 and fast
94Boy is offline  
Old 03-05-2008, 05:34 PM
  #3  
Registered User
 
Cr8zyDrifter's Avatar
 
Join Date: Feb 2008
Location: Texas
Posts: 99
you should ask this same question on a 350z forum? because everyone here is going to say 240. come on dude you know that. But i do really like the 350z too don't get me wrong. but if i had like 30,000 dollars i would definitely have a ***** to the wall, everything perfect and done on my 240. Something about the idea of pulling up the light in a 4 banger and totally blowing the **** out of a car that totally thought they were gonna win and then drifting around the next corner. And plus 240's are just ***king Bada$$! so im going to have to say 240 all the way!!!!
Cr8zyDrifter is offline  
Old 03-05-2008, 05:52 PM
  #4  
Contributing Member
iTrader: (1)
 
yarou's Avatar
 
Join Date: Nov 2006
Location: San Francisco, CA
Posts: 501
what the ****, buy a 350 and never look back. dont listen to these kids
yarou is offline  
Old 03-05-2008, 06:04 PM
  #5  
Registered User
Thread Starter
 
soul strong's Avatar
 
Join Date: Apr 2007
Location: chicago
Posts: 37
maybe i just want more power cheaper and relaible. what about a 240sx with rb25det? i mean im going to swap the engine anyway why not go for something more powerful. rb26dett is to hard....but yeah i want about 350-400 hp and im sure the rb25det would give me more tq too. vs the sr20det
soul strong is offline  
Old 03-05-2008, 06:15 PM
  #6  
Contributing Member
iTrader: (1)
 
yarou's Avatar
 
Join Date: Nov 2006
Location: San Francisco, CA
Posts: 501
If you're seriously asking those questions, you'd be better off not swapping any engines at all. Just get the 350 and call it a day, it'll make the power you want without the mess. I'll say it, VQ > RB
yarou is offline  
Old 03-05-2008, 06:33 PM
  #7  
Registered User
 
94Boy's Avatar
 
Join Date: Jan 2008
Location: PA
Posts: 456
Originally Posted by yarou
what the ****, buy a 350 and never look back. dont listen to these kids
Dam man if i had money to buy a z or fix up a 240. I would do a 240 and make it fast as hell. Fix everything up. But if you get a z You will not have alot of money to put in to it
94Boy is offline  
Old 03-06-2008, 01:07 AM
  #8  
Registered User
 
Drift Motion's Avatar
 
Join Date: May 2006
Posts: 120
go for the Z man, u wont regret it
Drift Motion is offline  
Old 03-06-2008, 07:53 AM
  #9  
Contributing Member
 
TypeX180's Avatar
 
Join Date: Oct 2007
Location: Uniontown, Ohio
Posts: 1,102
buy the z dude...240 are pos's
TypeX180 is offline  
Old 03-06-2008, 02:59 PM
  #10  
Registered User
 
Spade's Avatar
 
Join Date: Mar 2007
Location: Weston Florida
Posts: 188
I wud be completely toward the 240. but I'm saying that more so because my dad had a 1989 fastback and it was the first car I drove. so I'd be much more attached to one if I had it. I'm not a fan of the 350Z looks but if you like it, thats where its at. otherwise, you cud do a swap on the 240.

my decision - keep the 240 and do a RB26 swap with a RB25 tranny or just simply turbo up a SR20. garrett T3/T04E with .64 trim FTW.
Spade is offline  
Old 03-06-2008, 03:15 PM
  #11  
Contributing Member
iTrader: (1)
 
NiSmO Knight's Avatar
 
Join Date: Apr 2003
Location: Cali
Posts: 1,432
Originally Posted by soul strong
maybe i just want more power cheaper and relaible. what about a 240sx with rb25det? i mean im going to swap the engine anyway why not go for something more powerful. rb26dett is to hard....but yeah i want about 350-400 hp and im sure the rb25det would give me more tq too. vs the sr20det
That would be the cost of a Z33 right there and poswer gains would be about equal. I'm with Henry, Z33 and no looking back, the dynamics of the Z are night and day compared to the S13.

Newer technology, far better handling and fuel mileage is even better depending on how you drive.

Personally, Im keeping the S14 for my brother since he loves that thing so much. If he didnt care, I'd be rocking a G35 picking up poontang pie every Fri and Sat night. And sound system wise, you can build a competitive sound system for under 2G's if you know people. Just network around and you'll find sweet *** deals, no joke.

Originally Posted by yarou
If you're seriously asking those questions, you'd be better off not swapping any engines at all. Just get the 350 and call it a day, it'll make the power you want without the mess. I'll say it, VQ > RB
I can also say that the reason why Nissan close the final page of the RB chapter was because of the fact that they needed to move onto new technology, hence the VQ series and now the VR series. A lot to think about, Henry is not lying there, VQ > RB for sure.

Last edited by NiSmO Knight; 03-06-2008 at 03:20 PM.
NiSmO Knight is offline  
Old 03-06-2008, 03:16 PM
  #12  
Contributing Member
 
TypeX180's Avatar
 
Join Date: Oct 2007
Location: Uniontown, Ohio
Posts: 1,102
can i ask you a question spade??

no?? well i will anyway...wtf is up with you and swaping in the RB26?? then pay money for the 25tranny??? why not just ummm....buy a RB25???

or....buy a RB20 and save the extra cash from not buying the 26 and build it??

you seem like the kinda guy that would buy and SR S15 just because its out of the S15...

anyway..dude..buy the Z33..****ing walk on 240's..have **** that people don't call probes..with everything that works...and the VQ..just do it


***edit...if you really want the 240 that bad..buy the Z33 and i'll trade you even

Last edited by TypeX180; 03-06-2008 at 03:23 PM.
TypeX180 is offline  
Old 03-06-2008, 03:47 PM
  #13  
Contributing Member
iTrader: (1)
 
NiSmO Knight's Avatar
 
Join Date: Apr 2003
Location: Cali
Posts: 1,432
Originally Posted by TypeX180
can i ask you a question spade??

no?? well i will anyway...wtf is up with you and swaping in the RB26?? then pay money for the 25tranny??? why not just ummm....buy a RB25???

or....buy a RB20 and save the extra cash from not buying the 26 and build it??

you seem like the kinda guy that would buy and SR S15 just because its out of the S15...

anyway..dude..buy the Z33..****ing walk on 240's..have **** that people don't call probes..with everything that works...and the VQ..just do it
I can answer that easily, not all people understand what is involved with the 26 swap. *rolls up sleeves*

For one, YES, I was involved in a complete RB26 swap into an 180sx. **** was hard and took us 7 1/2 months to complete!

Reason why people use the 25 tranny is because the 26 tranny will not work, the front transfer case will just spin, no power will be delivered to the rear.

As for ECU, you need to use the Apexi Power FC w/ FC Commander. Stock 26 ECU will NOT work.

Now that I've given you the basics, the cost of this swap would be 10K hook up in labor alone! This job is normally 15-20K easy at any shop that knows their ****.

I'm with Tripp, I'd rather plug up a Neo RB25 and do a Greddy intake mani and call it a day, the price I'd spend just installing the 26, I can have a 400+ hp Neo 25. But with that money, I'd do a Chevy LS2 swap with an Eaton super charger and just burn all the others away, at the same time destroying my chassis.
NiSmO Knight is offline  
Old 03-06-2008, 04:06 PM
  #14  
Contributing Member
iTrader: (1)
 
ryguy's Avatar
 
Join Date: Feb 2006
Location: Highland, IN (Chicago)
Posts: 2,288
^haha Tripp was talking **** to Spade because he doesnt understand or care what a waste the RB26 swap is.


If you get a 350z remember that insurance is going to be THROUGH THE ROOF. 350z's have one of, if not the, highest death rates of any car.
ryguy is offline  
Old 03-06-2008, 04:41 PM
  #15  
Registered User
 
Cr8zyDrifter's Avatar
 
Join Date: Feb 2008
Location: Texas
Posts: 99
well since everyone hates 240's on this forum. I will help all of you out, and take them off your hands.
Cr8zyDrifter is offline  

Thread Tools
Search this Thread
Quick Reply: fix my car or just f**k it.



All times are GMT -7. The time now is 05:54 PM.