FS: RB26 with RB25 Tranny... from McKinney!
Thread Starter
Registered User
Joined: Sep 2003
Posts: 28
From: Springfield, MO
FS (LOWER PRICE): RB26 with RB25 Tranny... from McKinney!
Well, I am changing the direction I'm going with my car so it looks like I will be selling my RB26. I purchased it from McKinney Motorsports at the beginning of the year and they have been nice enough to hold it for me until I was going to be able to get out there. But now that plan is a no-go. So, I have one week while McKinney is in Houston for a race-event to see if I can find a new home for her before McKinney gets back to the shop to ship it. If I don't find anyone serious by next week then I will have it shipped to me and then I will most likely put it on eBay because I think it would demand a much higher premium on there because people tend to pay more than what things are worth typically. So, I'm offering it on some of the 240 forums first because you guys have given me a lot of useful info over the course of my build so I wanted to give you guys first dibs.
-R32 (late model R32 according to McKinney) RB26 in GREAT condition (it is from McKinney, so you know the quality)
-No Computer or wiring harness (I was planning to go stand-alone... as I'm sure many would who are going rb26). If you need a wiring harness and/or computer I know McKinney can get them but that will be up to you.
-Comes with an RB25 tranny
My asking price is $5500 plus shipping (shipping should run $400-600 depending on your location). It would be shipped directly from McKinney.
RB26s are going for around $5500 in decent condition right now, and the tranny is going for $800-1400 ...if you can find one. So, I think $5500 is a reasonable price to ask. I will accept any SERIOUS offers, but I am pretty firm with this price. No trades, and no I will not seperate the motor from the trans... it is a package deal.
I do have a couple of crappy pics of the motor... I was in Cali for the D1 event (McKinney actually invited me and Underground Motorsports out for the event) and we went by his shop and I did take a couple pics of my motor sitting there... but it was in the corner under a large shelf so it was hard to get a good picture... but I do have some if anyone is interested in those as well.
I know I may look like a noob cause I have not posted here much... but I think that anyone that has been around forums long enough should know that a post count has little to do with how much you know or what you've done. Some of you who may be interested might need some type of a reference to know that I'm not just some scammer or something. I have done quite a bit of work with Underground Motorsports so anyone who is SERIOUS about this motor and needs some type of reference for either myself or the motor can contact Chris at Underground Motorsports about that.
Other than that, please email me with any questions.
Adam Garrett
Adam@GTXgp.com
-R32 (late model R32 according to McKinney) RB26 in GREAT condition (it is from McKinney, so you know the quality)
-No Computer or wiring harness (I was planning to go stand-alone... as I'm sure many would who are going rb26). If you need a wiring harness and/or computer I know McKinney can get them but that will be up to you.
-Comes with an RB25 tranny
My asking price is $5500 plus shipping (shipping should run $400-600 depending on your location). It would be shipped directly from McKinney.
RB26s are going for around $5500 in decent condition right now, and the tranny is going for $800-1400 ...if you can find one. So, I think $5500 is a reasonable price to ask. I will accept any SERIOUS offers, but I am pretty firm with this price. No trades, and no I will not seperate the motor from the trans... it is a package deal.
I do have a couple of crappy pics of the motor... I was in Cali for the D1 event (McKinney actually invited me and Underground Motorsports out for the event) and we went by his shop and I did take a couple pics of my motor sitting there... but it was in the corner under a large shelf so it was hard to get a good picture... but I do have some if anyone is interested in those as well.
I know I may look like a noob cause I have not posted here much... but I think that anyone that has been around forums long enough should know that a post count has little to do with how much you know or what you've done. Some of you who may be interested might need some type of a reference to know that I'm not just some scammer or something. I have done quite a bit of work with Underground Motorsports so anyone who is SERIOUS about this motor and needs some type of reference for either myself or the motor can contact Chris at Underground Motorsports about that.
Other than that, please email me with any questions.
Adam Garrett
Adam@GTXgp.com
Last edited by GTXgp; Jul 23, 2004 at 09:16 PM.
Registered User
Joined: Oct 2003
Posts: 176
Do u do any kind of financing?
Like a payment plan?
No seriously, I would even pay u an interest rate..
hey I at least had to ask..
Like I give u a deposit or down payment, and we put it in writing and as soon as I pay u the balance in FULL, u ship that bad *** ***** out to me?
Like a payment plan?
No seriously, I would even pay u an interest rate..
hey I at least had to ask..
Like I give u a deposit or down payment, and we put it in writing and as soon as I pay u the balance in FULL, u ship that bad *** ***** out to me?
Thread Starter
Registered User
Joined: Sep 2003
Posts: 28
From: Springfield, MO
Well, it would depend on a few things...
1. how much of a down payment?
2. how much "interest" are you going to offer to make it worth my while?
3. how long would you going to take to pay in full?
I'm not a business. I'm just a regular guy who wants to take this money and put it toward better (well, nothing gets much better than an RB26... but you know what I mean) things. So, payment sooner rather than later is preferred obviously.
Adam
1. how much of a down payment?
2. how much "interest" are you going to offer to make it worth my while?
3. how long would you going to take to pay in full?
I'm not a business. I'm just a regular guy who wants to take this money and put it toward better (well, nothing gets much better than an RB26... but you know what I mean) things. So, payment sooner rather than later is preferred obviously.
Adam
Registered User
Joined: Mar 2004
Posts: 51
From: Austin TX
Originally posted by Sil80guy
Do u do any kind of financing?
Like a payment plan?
No seriously, I would even pay u an interest rate..
hey I at least had to ask..
Like I give u a deposit or down payment, and we put it in writing and as soon as I pay u the balance in FULL, u ship that bad *** ***** out to me?
Do u do any kind of financing?
Like a payment plan?
No seriously, I would even pay u an interest rate..
hey I at least had to ask..
Like I give u a deposit or down payment, and we put it in writing and as soon as I pay u the balance in FULL, u ship that bad *** ***** out to me?
Thread Starter
Registered User
Joined: Sep 2003
Posts: 28
From: Springfield, MO
I have some other stuff that I'd like to spend some $ on... so new EVEN LOWER price... $5250 SHIPPED!!!
Adam
Adam@GTXgp.com
Adam
Adam@GTXgp.com
