FS: S13 Blacktop SR, Greddy downpipe, Hallman MBC, etc.
Thread Starter
Registered User
Joined: Feb 2003
Posts: 150
From: Omaha, NE
FS: S13 Blacktop SR, Greddy downpipe, Hallman MBC, etc.
Ok, my car's EXTREMELY close to being put up for the year (within a week or two) and I'm ready to part with some stuff that I won't be running next year because the new setup won't allow it.
1.) Greddy downpipe. It's been on for a year and is in good shape. There's no dings/dents but the bottom of the downpipe is scraped from going over speed bumps. Paid 159.00 for it brand new, make me an offer.
2.) A Hallman Evolution manual boost conroller. For those of you who don'tknow what it is I'll quickly explain. It's an in-cockpit manual boost controller. it runs off of a cable that's fed from the engine bay to the cockpit (that way you don't lose any psi and don't have to run vacuum line) Color is anodized red just like in the picture.
here's the link to the boost controller for anyone who wants more info.
http://www.boostcontroller.com/index...26category%3D5
**above pictures are the factory pictures until I can get some pics of the actual items that are on my car.
3.) My S13 Blacktop SR20DET motor. I have a fully built redtop now, so I do not need the blacktop anymore. Motor runs great, oil changed regularly, mobil 1 Synthetic. No problems with it.
Everything the motor comes with:
Here's the stuff the SR DOESN'T come with:
Note: The whole motor is together, so it's not being pieced out...(the block&head&tranny are all together, not taken apart..selling as one whole unit)
This was posted in another thread I had made, but thought I'd post it here as well.
4.) Selling my J30 VLSD w/ axle shafts included. It has polyurethane bushings in the mounts and metal spacers. Runs great, just going with a Clutch-type limited slip for next year. Has 67K on it. Again, this is still on my car but coming off within a few weeks or so. Taking offers
5.) Denso 720cc Top-feed injectors (I have 6). Used, 48K on them. Need to run 96/lb injectors for next year (1000cc) so these are no longer sufficient for me.
6.) SSAutochrome T3/T4 top-mount manifold. Never been used. Flanged for 2 bolt Tial flange...35/38mm.
7.) 300ZX TT MAF with piggytail
I check the board quite often, but the best way to get a hold of me would be through email. Fireplugsx@hotmail.com
Aaron
1.) Greddy downpipe. It's been on for a year and is in good shape. There's no dings/dents but the bottom of the downpipe is scraped from going over speed bumps. Paid 159.00 for it brand new, make me an offer.
2.) A Hallman Evolution manual boost conroller. For those of you who don'tknow what it is I'll quickly explain. It's an in-cockpit manual boost controller. it runs off of a cable that's fed from the engine bay to the cockpit (that way you don't lose any psi and don't have to run vacuum line) Color is anodized red just like in the picture.
here's the link to the boost controller for anyone who wants more info.
http://www.boostcontroller.com/index...26category%3D5
**above pictures are the factory pictures until I can get some pics of the actual items that are on my car.
3.) My S13 Blacktop SR20DET motor. I have a fully built redtop now, so I do not need the blacktop anymore. Motor runs great, oil changed regularly, mobil 1 Synthetic. No problems with it.
Everything the motor comes with:
- ACT 2100 lb clutch (currently installed)
- Heavythrottle hotpipe w/ blitz bov flange
- Blitz SuperSound bov
- 2 1/2" hard intake pipe w/ cone filter
- S13 blacktop longblock
- S13 blacktop Head
- S13 SR Tranny
- S13 SR20DET ECU
- S13 SR oilpan
- S13 SR intake manifold
- S13 SR exhaust manifold w/ turbo, turbo extension, etc.
- S13 SR MAF
- S13 SR flywheel
- S13 SR fuel rail and 370cc injectors
Here's the stuff the SR DOESN'T come with:
- MY red powdercoated SR valve cover
- SR pulleys
- SR ignitor chip
- SR wiring harness
- SR CAS
- SR coilpacks
- The belts I bought
Note: The whole motor is together, so it's not being pieced out...(the block&head&tranny are all together, not taken apart..selling as one whole unit)
This was posted in another thread I had made, but thought I'd post it here as well.
4.) Selling my J30 VLSD w/ axle shafts included. It has polyurethane bushings in the mounts and metal spacers. Runs great, just going with a Clutch-type limited slip for next year. Has 67K on it. Again, this is still on my car but coming off within a few weeks or so. Taking offers
5.) Denso 720cc Top-feed injectors (I have 6). Used, 48K on them. Need to run 96/lb injectors for next year (1000cc) so these are no longer sufficient for me.
6.) SSAutochrome T3/T4 top-mount manifold. Never been used. Flanged for 2 bolt Tial flange...35/38mm.
7.) 300ZX TT MAF with piggytail
I check the board quite often, but the best way to get a hold of me would be through email. Fireplugsx@hotmail.com
Aaron
Registered User
Joined: Aug 2003
Posts: 249
From: QUEENZ, NYC
how many miles on the motor? im very tempted
also im gonna need all that other stuff u're not selling with the motor since the motor wont start without them. give me package price for everything need to run it (minus i/c, and rad)
also im gonna need all that other stuff u're not selling with the motor since the motor wont start without them. give me package price for everything need to run it (minus i/c, and rad)
Last edited by WILDACEXXX; Dec 13, 2004 at 11:08 PM.
Thread Starter
Registered User
Joined: Feb 2003
Posts: 150
From: Omaha, NE
as far as the items you need (the ones not included. I'm not 100% sure. It depends on where you get them from. A lot can be snatched off of ebay, or you can go to SRswap.com or enjkuracing.com or phase2motortrend.com and find the parts that aren't included. Thanks
Aaron
Aaron
Thread
Thread Starter
Forum
Replies
Last Post
rancidnsx
Private For Sale / Wanted
1
Oct 31, 2005 01:58 PM
SiNFuL
Private For Sale / Wanted
0
Aug 9, 2003 10:55 PM