Unfortunate Circumstances, must sell boost project :-(
 

Well on Monday my S14 was totaled by an Arizona female that can't drive correctly so I have to sell all of this stuff so I can buy another 240sx. Fortunately for me I didn't have any of this stuff installed at the time. The Greddy turbo kit is HPC coated and was not installed after the coating was put on. The Greddy FMIC kit is brand new and still in the Greddy box. The Greddy Profec B Spec II is new in the box as well. My loss is your gain.

If you are looking to do a KA-T project this is a great deal to start of with. You can pick what ever fuel, and fuel/timing management you want and save big $$$. Thanks for looking :-)

Greddy S14 KA24DE turbo kit includes: Greddy TD06 20G Turbo charger(no shaft play), Greddy Cast iron exhaust manifold, Greddy Steel down pipe, Greddy Compression pipe elbow (c-1), Intake pipe, Oil feed line, oil feed T fitting with all adaptors and fittings, Oil return flange, oil return pipe for pan, misc hoses and clamps, 2-2.5" reducer, 2.5-3" reducer, 2" coupling X's 2, Heat shield, vacuum line, all studs and bolts for mounting, and full color instructions. The kit does NOT include Emanage, injectors, and fuel rail. You will need the Greddy FMIC kit with this turbo kit. The compressor housing is polished, the turbine housing is HPC coated, the exhaust mani is HPC coated inside and out, the Down pipe is HPC coated inside and out.
USED $1500

Greddy KA S14 FMIC kit $725 new

Greddy Profec B $265 new

BOSCH BOV from Porche $35 new


I took the liberty of getting shipping quotes on both large items. They aren't as high as I thought they would be...

Greddy Turbo kit shipping: 19X13X13 40Lbs $40 anywhere in the continental US.

Greddy FMIC kit shipping: 18X38X12 30Lbs $35 anywhere in the continental US.

I was surprised how inexpensive shipping was considering the Ebay sellers charge $75-100 flat rate for each item. I think this is a better deal. I live in Arizona 85242 :-) Thanks for looking.

Go here for PICS and scroll down a little. I use the same name on every board... http://www.********.com/zerothread?id=85488

*SOLD*Greddy Profec B Spec II *SOLD*

The Greddy Turbo kit and FMIC kit are still available :-)

I just posted a p[ic of the Bosch BOV here...

http://www.********.com/zeromodify?c...post&id=897880

i feel real bad for u man... i had an MX-6 b4 my S14 and a real stupid NJ WOMAN driver claimed that. up 4 u

email me about the fmic kit..and does the bov recirculate? i have an sr20det s14 front clip, will this work for mine?

email me about the fmic kit..and does the bov recirculate? i have an sr20det s14 front clip, will this work for mine?

All the equipment has been sold. Thanks for your interest :-)