As some of you may have noticed, we have a new section entitled "resources". This is our S-Chassis.com wiki for all resource articles including general information, how-tos, common problems, basic maintenance, and tech articles. I have already added titles for numerous articles I would like to have and will be making an effort myself to fill this. Our goal is to have this being the single most comprehensive resource for s-chassis owners. So go forth and populate (the wiki).

https://www.s-chassis.com/resources/...S-Chassis_Wiki

 

CHARLES HELP! It won't let me create new articles.

 

Try it now.

 

I added an article but it won't go into paragraph form. Each paragraph is one long line. I think I need my hand held

 

a lot of good how tos have already been done and stickied. so why not just move them over the appropriate section.

 

Its not like a post, it closer to writing HTML unfortunately. Everytime you would normally press "enter", you need to end the line with "<BR>"

 

i will transfer all of my write ups.. i have mastered HTML..

are you going to add and how to section?

 

Hey, when I made a contribution to the Wiki it made a post in the forum. Does it automaticaly do that or is it something I did?

 

Unhappy with all existing ecu pinouts, I am making my own comprehensive ones for all RBs, SRs, KAs, and CAs. Check it out

https://www.s-chassis.com/resources/...sx_ECU_Pinouts

 

Make a note charles that most sr/ka ecu pinouts are exactly the same when you cross reference for SAFC installation.
Helped you out a little bit I added the OBD1 ecu pinout.
I will also ad piggy back wiring for emanage and SAFC.
If I have the time wide band o2 installation to ecu/lamda/uego gauge...

 

i take that back.
obviously what i was thinking was not what you have in mind.

 

Making some headway. We now already have the largest single resource of ECU pinouts that are easily accessible to the public. Plus, IMO my reworks of them are easier to read then other sources out there. I am just about finished with all 240sx and silvia/180sx (turbo) ones. I will then move onto the RB series, chevy LS v8s, and finally work back into the NA SR20s, and s12 engines.

 

good work charles