89 240SX 400whp SR20 Very Nice-PRICE REDUCED!!! Must See! Lots of Huge Pics!!!
18 Attachment(s)
I have decided to get rid of my 4 year project car, and move on to a more budget friendly project.
Engine Modifications: SR20DET Red Top motor Completely built with <1500 miles on it Eagle Rods CP Pistons (stock compression) New OEM oil pump Greddy T67 25G turbo (polished) Tial 44mm wastegate (routed back into exhaust) Custom downpipe AEM EMS standalone (tuned by Hybridynamics) AEM wideband O2 sensor AEM 3 bar map sensor Boost Cooler methanol injection from Snow Performance (installed-never used) Nismo 740cc injectors Accufab throttle body Greddy intake manifold (polished) HKS 1.2mm head gasket Greddy valve springs Greddy Type S BOV Hallman MBC Greddy oil catch can Greddy PE-II Exhaust Greddy radiator cap HKS 272/272 Step 2 camshafts HKS turbo timer Blitz LM Intercooler Blitz single plate active clutch+flywheel Koyo radiator Flex-A-Lite dual electric fans Projectnissan.com testpipe Enjuku aluminum driveshaft B&M short shifter kit Painless Performance wiring harness (professionally installed @ Hybridynamics) Optima red top battery Taylor aluminum battery box Walbro fuel pump 300ZX Z32 fuel filter ARP head studs Suspension: Wheels & Tires front: 17x9 5Zigen FN01RC Hyper Black Pirelli P-Zero Nero 245/40/17 rear: 18x9.5 FNO1RC Hyper Black Pirelli P-Zero 275/35/18 D2 Coilovers TTT subframe spacers J30 VLSD extra 6 bolt half shafts (included) Exterior: S13 Silvia front end conversion Non Projector headlights (Square Eyes) Raybrig headlight bulbs Hella horns (loud!!!) O.E. Tuning carbon fiber hood w/ Moroso hood pins AIT body pieces (bumpers,front fenders,skirts) Pulled rear fenders (flawless body work- approx. 1" pull) Shaved 3rd brake light and antenna hole Shaved body line Extensive shaving and smoothing of engine bay and back hatch area Interior: Auto Meter gauges (in pillar pod and deleted heater vent) Autometer boost,A/F, oil pressure gauges Autopower 4pt. roll bar JDM 180SX seats (w/ 180SX gradation pattern similar to Bride) Willans Harnesses ACC black carpet Nismo GT shift knob (black rubber) Nardi Competition 350mm wheel All grey tweed replaced w/ black tweed Headliner, visors, etc. dyed black (looks better than new) The car was just recently dyno tuned at http://www.hybridynamics.com and made 400 whp and 305 ft/lbs of torque. This was tuned at 18psi on pump gas. The boost cooler injection was not used, and the tune was not pushed to the limit, due to the freshly rebuilt engine. I am certain that there is another 50 whp to be had out of this setup, but let me say that 400 whp is no joke! I have picked up a couple of chips on the front bumper from a 5 hour road trip to Carlisle, PA. I plan to have these touched soon. The car has given me NO ISSUES between the 5 hour road trip, and just cruising around town. I have alot of money in both the motor and the body work, which is why I am asking what I am. I have never seen a 240 in person that was more complete, with a higher attention to detail than mine. Not arrogant, just honest. I am very open to a trade + cash situation. I am in need of some money for bills, but I also can't imagine not having some sort of a toy to play with. I will at least consider anything, so let me know. Asking $19,000/best/trade. Not willing to part out at this point. I will let you know if that changes. Located in Columbus, OH. Attachment 23109 Attachment 23110 Attachment 23111 Attachment 23112 Attachment 23113 Attachment 23114 Attachment 23115 Attachment 23116 Attachment 23117 Attachment 23118 Attachment 23119 Attachment 23120 Attachment 23121 Attachment 23122 Attachment 23123 Attachment 23124 Attachment 23125 Attachment 23126 |
wow im sorry your giving up your project because a 240 this nice you dont see every day it is simply beautiful. i dont think i could even race such a beautiful 240 or even maintain its super clean engine bay. gl on the sale :smilie_thumbsup:
|
I've seen this car in person at Carlisle.... FRIGGING PRISTINE!!!
|
that car is gorgous
|
Wow!!! Flawless vehicle. I would of picked up this car if it was for sale back in March for sure.
|
Lowered asking price to $18,000/best/trade
Thank you for the comments. Please pass along my email if you know of someone who may be interested: bchumley1@yahoo.com |
you have the cleanest 240 i have ever seen...ill straight trade you a 1990 mazda 626
hahaha |
Price lowered to $17,000/best offer. Thanks
|
$16,500/best offer. Such a great deal to the right person.
All trades considered!!! I know I'm brand new on this site, but many people can vouch for me as a no BS guy on a few other sites. Thanks, Bret |
Nice ride. Pls PM me, interested.
|
that car looks great, I would keep it and still move on to something else. I would like to see it in person sometime.
|
damn and my friend just got a s13 for 15k its nice but no where near what yours is bummer
|
thats a super nice 240! Why would you sell it? Keep it and just move onto another project! Man thats the cleanest engine bay i have ever seen! :)
|
thanks for the props guys. I really do appreciate it, makes me proud of what I've put together.
Anyways, I sent a couple PM's. The car is still for sale. I have 3 parties who swear they are buying it, however I have yet to see any money, so as of right now, the car is still available. Thanks |
ruthless: if you wanna meet up in dublin sometime we could maybe cruise somewhere? I'd like to meet up before the car goes away forever :bluecrying:
|
All times are GMT -7. The time now is 05:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands