I have a project that i didnt have the time to finish, It is 95% done, With more than $9,000 invested.

I have this on ebay right now also, here's the link, as well as over 20 pics of the car....http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4553671466&ssPage Name=STRK:MESE:IT



HERE IT IS

MY LOSS IS YOUR GAIN.

I HAVE A 1989 NISSAN 240SX FASTBACK WITH A 1996 R33 SKYLINE GTS-T RB25DET WITH ONLY 70K km

HERE'S THE LIST SO FAR...

ENGINE
1996 R33 RB25DET new oil and filter
McKinney Motorsports custom motor mounts
McKinney Motorsports custom tranny mounts
R33 complete engine and dash harness, un cut
KA24 stock engine harness complete un cut
Greddy V-Spec Intercooler for S13, with piping
R33 Electric fan
HKS intake and filter
GReddy Type-R Blow off valve/ Diverter valve
Relocated power steering pump w/ stainless steel lines
R33 brake master cylinder
R33 brake booster
R33 clutch master cylinder
R33 clutch slave cylinder and hydraulic lines
R33 clutch pedal
R33 gas pedal
R33 stock tranny,
Nismo clutch brand new
MINE'S ecu (500 bucks alone- perfectly tuned, requires 100 octane, or at least octane booster)

SUSPENSION AND DRIVETRAIN
R33 4 piston calipers (front)
R33 5 lug brake rotors ( front)
JDM S13 V-LSD limited slip differential (VISCOUS)
McKinney Motorsports custom one piece driveshaft

INTERIOR
R33 gauges w/ boost gauge built in
R33 steering wheel
Greddy Gracer 4 point seat belt harnesses
Secchi Drift button
Carbon Fiber radio cover ( I also have the JDM CD player and tape deck...super cool)
Interior has been de-tarred and de-carpeted, and repainted
removed power seat belts, saved 50 pounds!!!!
Switches for electric fan and intecooler sprayer

EXHAUST
HKS titanium/stainless exhaust, 3" pipe 4" outlet
r33 stock downpipe

EXTERIOR
Advan gold 17x8 wheels on front
Yokohama 255/zr17 with 30% tread left
Falken Azenis 255/zr17 never used 100% left (not mounted on rims)
I have 4 old school 15x8's for the back,-27offset , no tires though- wheels are crazy wide!
JDM S13 silvia front end
s13 non turbo bumper, modified to suit big intercooler
carbon fiber grill
door handles partially shaved ( only the outside, not the handle)
s13 silvia stock hood, black
OEM taillights, with red turn signlas, not orange..ewww
Rare red skyline GT emblems on fenders


OK, SO I'M NOT QUITE DONE WITH THE CAR, I DONT HAVE IT RUNNING YET- ONLY BECAUSE I RAN OUT OF CASH AND TIME

HERE IS WHAT HAS YET TO BE DONE



finish intercooler piping ( I have it all, just needs welded)
finish exhaust from downpipe to muffler w/ 3" pipe ( not included)
finish wiring, only a $400 job if you send it to McKinney Motorsports, and I do have BOTH the KA24 harness and the RB25 harness, which they will need
this isnt necessary, but in order to have skyline brakes, either A. get 5 lug hubs for the front, or B. get the skyline rotors redrilled 4x 114.3, i am including the rotors and brakes
The body is CLEAN, the car is primered white, ready for paint. The rear hatch HAD a factory spoiler on it, which I promptly removed, so the holes need shaved off.

The interior is PARTIALLY gutted, i still have door panels, all the dash trim and such, it was off in the pics- all the carpet and tar, and back seats and trunk crud was removed

 

I live in Salt Lake and would be willing to come up and get it. What are you looking to get out of it? Maybe I can call you and we can discuss it? Let me know.

 

Im looking for 6500 OBO, You ned to let me know quick, it ends today on ebay, if i dont get 6500 OBO i will probably part out the car instead...REmember i spent over 10k so far on this project
Thanks! (208)853-6078 evenings-

John

 

omg!! that is such an insane deal... i sooo wish i had the money to fly there and buy that car immediately!!!