3 Attachment(s)
****in' my life.
Attachment 12766 Attachment 12767 Attachment 12768 Was street drifting [don't lecture me plzkthx] wasn't pushing the car or myself hard just hit a patch of dirt at about 45 while starting a feint and induced the battle of LMGT4 Vs Curb. Car is being garaged for the winter, in the mean time it will be getting a refresh on the motor finally a 5 speed swap coils and a new nismo wheel lol. I'll be dailying the s13 track car during the winter sadly..... |
Nsimo Vs Curb
6 Attachment(s)
Been a pretty interesting week for the good ole kouki. Drove her front right wheel [ironic] off a 3foot drop off. Luckily I was able to lift the car up and have a friend reverse the car. Blah blah no damage to her except her seam weld. [no pics of this incident.
I was out street drifting the other night since it was a little wet out. [I know that this is stupid of me considering I'm the one that puts together and hosts the Kansas drift events] I went out to a new housing area since the roads would be especially slick and understeered into a curb while setting up for a *****in' feint. kouki before Attachment 12754 kouki after Attachment 12755 Attachment 12756 Attachment 12757 Attachment 12758 Im worried about that little puddle of liquid, I will look into it when it's brought home tomorrow. [along with more extensive pics of damage] Crashing is something that happens when you street drift, I know this but I was immature to continue doing it and this is the out come. She will be sitting over the winter and possible will just have all the parts replaced with aftermarket. We'll see. Gotta stay positive. Attachment 12759 |
you "slidded" into a curb??
i really like those nismo rims i looked everywhere for them. it saddens me to see them banged up. ill admit everytime it rains im also trying to get some practice in |
Nsimo, must be a new brand. ;)
Street drifting isn't very smart, but hey, I would be lying if I say I haven't done it. So would more than half the people who are on here. I guess now you can move on to bigger and better things (quote from a million movies). And look on the bright side, you got a nice drop that the car needed! (jk of course) Goodluck, with the aftermarket parts. What's going on with the zenki, haven't heard much about it at all lately. |
wow that looks sooo familiar, o yea! iv done the same thing haha oougghhh....
luckily i get all stock parts at cost an with a brand new rim an me doing all the labor it only cost me 350 bucks haha yea only..., now my caster an cmaber r a lil off till i get coilovers this winter:ylsuper: also a victim of street drifting! |
Originally Posted by fadedsilvia
(Post 376432)
wow that looks sooo familiar, o yea! iv done the same thing haha oougghhh....
luckily i get all stock parts at cost an with a brand new rim an me doing all the labor it only cost me 350 bucks haha yea only..., now my caster an cmaber r a lil off till i get coilovers this winter:ylsuper: also a victim of street drifting! Zenki is sold. I have an s13 hatch now bolt in cage megan arms megan racing coils ATS 2 way 5 pt harnesses Rebuilt KA stage 2 clutch |
=(
s14 Zenki > s13 hatch =( Which one handles better at the track? |
stock s14 vs built s13? stock for stock I prefer s14, but this isnt very fair haha
|
I thought you had work done to the S14...
|
wow damn man sorry i hope this never happens to me damn SSR's are about $500 each depending if its front or rear wheel
|
Originally Posted by shaban
(Post 376477)
I thought you had work done to the S14...
|
Originally Posted by battosaii930
(Post 376478)
wow damn man sorry i hope this never happens to me damn SSR's are about $500 each depending if its front or rear wheel
thenismoshop.com quotes 18X8.5 Bronze $540.00+shipping. |
what all did you bust?
could have a steering issue after you replace that tie rod since it got jammed in so look out for that. Shouldn't be too $$$ to fix. I assume tie rod, ends, LCA? |
5 Attachment(s)
Attachment 12362
Attachment 12363 My replacement wheels Attachment 12364 old vs new LCA Attachment 12365 Attachment 12366 I've been taking forever on fixing her so I cant postpone driving her until the winter is up. Front suspension xmember is bent a little at the end. I dont think it affected where the bolt for the LCA connects though so it outta be ok. Will check tie rod soon. Bushing in the Tension rod was destroyed. Tension rod is stuck in the LCA, becasue the LCA bent on top of it. The studs in the Tension rod also bent. Just an excuse for me to hit up SPL parts. |
2 Attachment(s)
Front suspension xmember was far more bent than I thought.
Tension rod where the bushing is was bent from a O to an oval. Since I have to "lift" the motor up to replace the suspension member [lolololol] I'm just going to do a 5 speed swap. w00t All I need are some front struts after this and it's golden. <3 Attachment 12213 Attachment 12214 |
All times are GMT -7. The time now is 07:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands