2fast4y0u

ok. so i finally have a speedometer that works...but heres the catch, it reads only in kilometers and it has that speed cut at 115mph/kph. so when im driving and i get to 115 on the speedometer which approx. 50-55 mph the car shuts down.

So, heres my question. now that i have it all hooked up and have to take it apart again, how do i or what do i need to buy to make it read normal?????????

do i need to get a speed sensor from a manual trans s13-s14 usdm?

no one seems to know and i cant stand not knowing how fast im going other than rpm's

Please help me out here.

Thanks,
Jay

jonpowell

Find the wire that feeds the speed signal to the ECU..I believe its yellow/green. CUT IT.

2fast4y0u

i know how to get around that speed cut. i need to know how to make my car read in mph again.

Skiboard06

u need a speed sensor from a ka tranny splice that into the speed senor spot on ur sr tranny its two wires a green and a black i believe easy job

2fast4y0u

what yaer ka tranny...s13 or s14. i tried using the one form my automatic tans and it doesnt even come close to fitting

thanks for the help
Jay

Skiboard06

i used my speed sensor off my '90 ka24e manual transmission. i know that a s13 dohc (ka24de) speed sensor will work, but im nearly positive it has to be from a manual transmission. get one from a junkyard for like 5 bucks they will not know what it is