harness question

Reply Subscribe

Thread Tools

Search this Thread

Oct 10, 2003 | 04:41 AM

Doba's240

Thread Starter

Registered User

Joined: Jul 2003

Posts: 267

From: Brantford, Ontario, Canada

harness question

I now have my KA out and am in the process of cleaning the engine bay, however i cant install the SR over the long weekend because i dont have my oil pan yet (shiit)
But i was wondering if it was ok to install the SR harness leading to the ECU and just having it hanging over the side, while i put back together my interior?

will this process have a conflict on those wires i have to lengthen and shorten?
or should i re-do the harness according to (import racer) then install it?

what do you guys think?

Oct 10, 2003 | 10:16 AM

veilsides14

Registered User

Joined: Oct 2003

Posts: 4

From: Land of milk and cheddar.

That will be fine. The wires that need to be lengthed are ones like the MAF sensor and others. They are all part of the engine harness that will hang off the side. Once it's plugged into the ECU in the car, you don't need to touch anything else inside.

Oct 10, 2003 | 12:29 PM

Doba's240

Thread Starter

Registered User

Joined: Jul 2003

Posts: 267

From: Brantford, Ontario, Canada

Quote:

Originally posted by veilsides14
That will be fine. The wires that need to be lengthed are ones like the MAF sensor and others. They are all part of the engine harness that will hang off the side. Once it's plugged into the ECU in the car, you don't need to touch anything else inside.

sweet
thanks