s14 motor, s13 chassis

Reply Subscribe

Thread Tools

Search this Thread

Feb 26, 2004 | 10:55 PM

2.4lNeOn

Thread Starter

Registered User

Joined: Feb 2004

Posts: 6

From: san antonio

s14 motor, s13 chassis

does anyone have wiring diagram to swap the s14 sr motor into a s13 240sx chassis? i used the great search function and came up dry, any help appreciated!

ryan

Feb 26, 2004 | 11:00 PM

2.4lNeOn

Thread Starter

Registered User

Joined: Feb 2004

Posts: 6

From: san antonio

ps, i am not very talented in reading of diagram like in the fsm, any hand written ones would be great or wire codes to switch from the 2 plugs that need to be switched. thanks again

ryan

Feb 27, 2004 | 12:20 AM

-HyJynX-

Contributing Member

Joined: Mar 2003

Posts: 10,109

From: Pasadena,ca

There iant any that I know of...you need to get both of the wiring diagrams and them mix and match. Pretty tough...If I were you I would find a shop that can do it for you

Feb 27, 2004 | 04:19 PM

2.4lNeOn

Thread Starter

Registered User

Joined: Feb 2004

Posts: 6

From: san antonio

Unfortunately for now that is not an idea! it will not be happening by going to a shop and will all be done in my garage. ohh well looks like i will have some work to do

Feb 27, 2004 | 05:30 PM

Jack0423

Registered User

Joined: Aug 2003

Posts: 68

Try phasemotortrnd.com they have harness for both s13 and s14 motors, unstable-hybrids (uhrp.com), or jspec.com. None of them have diagrams posted but they may be able to point you in the right direction.

Feb 27, 2004 | 06:40 PM

NightXCZ77

Contributing Member

Joined: Dec 2002

Posts: 578

From: Arizona

I believe both harnesses are almost exactly the same...just go to heavythrottle.com and see if the wires that they list for the swap on your S14 harness are the same...