General For General 240sx/Silvia (s-chassis) discussions.

Blitz NUR Spec exhaust

Old Sep 14, 2002 | 11:57 AM
  #1  
S13drifter's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 18
Blitz NUR Spec exhaust

Anyone got it? Does anyone know does is come out at an angle? I'm going to buy an exhaust and i want it to have atleast a 70mm pipe, so HKS is out, i want it to come out at an angle (they just look so cool) and it has to be Stainless steel because i plan to own my car atlest 10 years and i want not to have to buy another. Blitz NUR Spec exhaust is looking like the one i want is is a 80mm in diameter and is stainless steel. I just don't know if it comes out at an angle. I'm buying it for a 1990 240sx and the best price i have found is $579.00 anyone know were it is cheaper? THanks.
Old Sep 14, 2002 | 12:01 PM
  #2  
S13drifter's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 18
Forgot to ask, does it comes with a silencer?
Old Sep 14, 2002 | 01:26 PM
  #3  
I'm with Stupid's Avatar
Contributing Member
 
Joined: Feb 2002
Posts: 1,841
From: NY
Don't mean to hijack your thread or anything, but I would like to know if anyone knows how the Blitz exhaust compares to the 5 Zigen (or any other cat-back) in terms of hp output?
Old Sep 14, 2002 | 06:40 PM
  #4  
nissandet240's Avatar
Registered User
 
Joined: Sep 2002
Posts: 13
From: Los angeles, CA
Lightbulb

want to look bad and being the cool cat. Get the apexi GT. thats what ill go for when after I finish my s15 swap. and it does ends at an angle,[IMG]http://[/IMG]
Attached Thumbnails Blitz NUR Spec exhaust-fraud.jpg  
Old Sep 14, 2002 | 06:42 PM
  #5  
nissandet240's Avatar
Registered User
 
Joined: Sep 2002
Posts: 13
From: Los angeles, CA
Talking

and it its a 95mm[IMG]http://[/IMG]
Attached Thumbnails Blitz NUR Spec exhaust-side.jpg  
Old Sep 15, 2002 | 10:45 AM
  #6  
S13drifter's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 18
That 95mm pipe would be nice if it wern't $780. And since i found out that both HKS ($520)and Apexi N1 turbo ($550) are both stainless steel i will go with one of them. If anyone has a pic of N1 or HKS then please post them. THanks
Old Sep 15, 2002 | 10:55 AM
  #7  
I'm with Stupid's Avatar
Contributing Member
 
Joined: Feb 2002
Posts: 1,841
From: NY
95 mm is completely useless unless your whole exhaust system were sized for that, it'd just be a wate of money.
Old Sep 16, 2002 | 02:44 AM
  #8  
nissandet240's Avatar
Registered User
 
Joined: Sep 2002
Posts: 13
From: Los angeles, CA
bla bla bla bla bla and bla
I know You dream on having it bolt on to your T25 or whatever U might have. I do
Old Sep 16, 2002 | 06:28 AM
  #9  
Sickboy's Avatar
Registered User
 
Joined: Sep 2002
Posts: 22
Question

If you can find a Greddy/TRUST distributor that offers it..
you could get the "Power Extreme II"
Their listed at Y58,000 yen.. retail, somewhere around $480 (not including U.S. mark-up and possibly shipping...

I have it; TRUST, although I picked it up for Y37,000 yen.. ($340) on sale in Okinawa...
Its angled at 80mm from Test-pipe back. Its not completely stainless, like the NUR, but the Trust design is good. It tucks up into the body and doesn't hang low (a plus for lowered cars), but retains a straight through design.. and looks nice, throaty and roars with an SR... of course it may be hard to hear over the open wastegate

I nabbed the pic off of TRUST's website:
Attached Thumbnails Blitz NUR Spec exhaust-mvc-080s.jpg  
Old Sep 19, 2002 | 04:34 PM
  #10  
battlestylespl's Avatar
Contributing Member
 
Joined: Feb 2002
Posts: 1,061
From: Wisconsin Sucks
the nur spec comes out at an angle
Old Sep 23, 2002 | 05:42 AM
  #11  
agressiveracing's Avatar
Registered User
 
Joined: Sep 2002
Posts: 248
almost all the exhausts that have the n1 style tip are angled..
also..
the gt isnt all big piping..
if u read it..
it goes from small to big
forgot the dimensions..
but for the guy who was curious bout other exhausts..
i have a 5zigen rocket...
and i think it is fine..
power gains???
ha ha ha more like power loss..
low end = major loss
high end = some gain..
its 80 mm piping..
and im on my ka24de
its meant for a turbo
so just be warned,,
Old Sep 23, 2002 | 07:09 AM
  #12  
Import Fanatix's Avatar
Contributing Member
 
Joined: Feb 2002
Posts: 1,115
From: NYC
Is that what you have on your car, no wonder its sooooooo loud. At least get a SR so the exhaust can be quieter. Who gets an SR for it to be Faster?
Old Sep 23, 2002 | 10:53 AM
  #13  
agressiveracing's Avatar
Registered User
 
Joined: Sep 2002
Posts: 248
yeah i know i know..
my exhaust has 1 muffler when stock had 2..
also i friggin lost my silencer..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TORSION
Private For Sale / Wanted
6
Aug 27, 2005 01:50 AM
DTS
Service, Parts & Tuning Review
8
Jul 10, 2004 11:04 AM
-HyJynX-
Private For Sale / Wanted
0
Dec 6, 2003 11:51 AM
Driftin180SX
NA Motor
0
Jun 12, 2003 06:16 PM
Driftin180SX
General
0
May 21, 2003 06:20 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 11:55 PM.