General For General 240sx/Silvia (s-chassis) discussions.

How to roll back odometer on S14?...Got New Cluster

Old Jan 16, 2006 | 10:25 PM
  #1  
blp0082's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 6
From: Dallas, TX
How to roll back odometer on S14?...Got New Cluster

I got a new gauge cluster for my 96 240sx, but its miles are higher than the actual miles on my car. Im not trying to pull any crap here, just trying to get it to read the correct miles. I can get as far as getting the speedo/odometer assy out and by its self, but thats it. Need to know how to roll the miles back on the odometer (the more detail the BETTER!) Thanks in advance!

Brandon
Old Jan 17, 2006 | 03:01 AM
  #2  
Bryan's Avatar
Registered User
 
Joined: Jun 2003
Posts: 8,440
From: Harrisburg, PA
moved to "General"
Old Jan 17, 2006 | 10:53 AM
  #3  
l2aine's Avatar
Contributing Member
 
Joined: Aug 2003
Posts: 6,587
From: Socal, 909/626
if I told you I'd break a federal law.

If you really want to do it just to keep track of your mileage, just write down the difference (say, "+ 5400") on the back of the cluster with a pen, or on a note and leave it with your reg papers, etc.

If you got a new cluster but your old speedometer/odometer works on the old cluster, just swap that into the new cluster and change the face (if you went from black to white, etc.)
Old Jan 17, 2006 | 12:25 PM
  #4  
nsn240's Avatar
Contributing Member
 
Joined: May 2005
Posts: 1,634
From: Hershey, PA
just swap the actual tach/speedo if you can... thats what i did because i needed the dohc tach
Old Jan 17, 2006 | 10:12 PM
  #5  
blp0082's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 6
From: Dallas, TX
ok so does anyone know how to remove the speedo needle? If im not mistaken, it has a cable that it attached to it which makes it more difficult to take off. I dont think it simply just pops off....
Old Jan 18, 2006 | 09:40 AM
  #6  
2forty2sick's Avatar
Registered User
 
Joined: Nov 2005
Posts: 16
From: Sacramento, CA
If you pop off the needles, you won't be at the same RPM's or Speed ever agian! You might even break a needle.
Old Jan 18, 2006 | 11:04 AM
  #7  
JessicaS14's Avatar
Registered User
 
Joined: Oct 2005
Posts: 341
From: Ahwatukee, Arizona (Phoenix)
I wouldn't even mess with it. This is like pulling a Ferris Bueller on the Ferrari. Except, they didn't take the speed/odo out of the car. Just swap it out like nsn_240 suggested. I think you're setting yourself up for one big mess if you try to set the other one back.
Old Jan 18, 2006 | 11:25 AM
  #8  
g3bio's Avatar
Registered User
 
Joined: Jan 2006
Posts: 400
From: Canada
breaking the needle is hard not to do its very brittle and can snap do yourself the favor and make it easier on yourself just swap.
Old Jan 18, 2006 | 04:59 PM
  #9  
nsn240's Avatar
Contributing Member
 
Joined: May 2005
Posts: 1,634
From: Hershey, PA
you can replace/take off needles... and see the right sh*t again, you just have to recalibrate them correctly... how do you think the import intellegence needle kits work??
Old May 18, 2006 | 03:32 PM
  #10  
ka-tfresh's Avatar
Registered User
 
Joined: May 2006
Posts: 248
does it really matter if you're not going to sell the car?
Old May 19, 2006 | 10:09 AM
  #11  
j00ni3's Avatar
Registered User
 
Joined: Apr 2005
Posts: 57
yea def... i think raine did also because he made new face plates at home ^^

hot job on those " HKS " faces Raine hehe
Old May 21, 2006 | 12:46 PM
  #12  
slimbung's Avatar
Registered User
 
Joined: Apr 2005
Posts: 82
From: Picayune, MS
just dont worry about the mileage besides i doubt that it would change resale value anyway... besides what does it matter if you plan on keeping the car.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
iceman991
General
0
May 22, 2004 11:00 AM
l2aine
Suspension, Chassis, and Brakes
1
Mar 20, 2004 12:49 PM
super_240
For Sale - Wanting To Buy (WTB) Or Trade (WTT)
4
Mar 8, 2004 11:03 PM
beee_24
General
0
May 29, 2003 05:27 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 08:48 PM.