S-Chassis.com

S-Chassis.com (https://www.s-chassis.com/forums/)
-   NA Motor (https://www.s-chassis.com/forums/na-motor-11/)
-   -   over heating with koyo rad (https://www.s-chassis.com/forums/na-motor-11/over-heating-koyo-rad-34334/)

sav180 Aug 16, 2006 07:49 PM

over heating with koyo rad
 
alright..i jus finished wiring my fans(running constantly) and the trick is over heating now.!!thought i got all the air out of the system,but my thermostat not opening..how did u guys get rid of those air pockets??i tried filling it up while that lil screw was off so the fluid can run though there so all the air can come out but it didnt work..but after i shut the car off and let it sit for 3-5 min it cools..so im thinkin i still got frickin air pockets..its crazy because today it was runnin for almost a hour and it warmed up till the middle line and stayed there(the rad cap was off and bleeder screw on the intake was open),then i drove it round the block a couple of times thinkin it was koo and it started rising,so i parked it and let it sit running and it jus stayed at the 2 lines from the middle line so now im like :dunno: ..lost

re037 Aug 16, 2006 08:09 PM

make sure front is elevated when you bleed

motegineon Aug 16, 2006 10:27 PM

have a blown headgasket...?

sav180 Aug 24, 2006 11:25 AM

your thermostat is open when it suck the fluuid from the over flow tank??


All times are GMT -7. The time now is 07:01 AM.


© 2026 MH Sub I, LLC dba Internet Brands