early christmas wish list
#1
Contributing Member
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: kennewick wa.
Posts: 2,324
early christmas wish list
let's hear them, what's on your list. in no particular ordered here's my list.
1. ?????
2. ?????
3. a gf that i can get along with for longer than 2 weeks
1. ?????
2. ?????
3. a gf that i can get along with for longer than 2 weeks
Last edited by jramosthe1st!; 11-29-2009 at 09:07 PM.
#5
A tunejob?
I want; Axis Shine or Axis Matrix wheels for the G35, Kinetix V+ Plenum (although I'm buying that in a couple weeks), JWT Popcharger/Stillen Z-tube, and 350z springs to lower my car.
Other than that, I would like
Twelve Drummers Drumming
Eleven Pipers Piping
Ten Lords a Leaping
Nine Ladies Dancing
Eight Maids a Milking
Seven Swans a Swimming
Six Geese a Laying
Five Golden Rings
Four Calling Birds
Three French Hens
Two Turtle Doves
and a Partridge in a Pear Tree
I want; Axis Shine or Axis Matrix wheels for the G35, Kinetix V+ Plenum (although I'm buying that in a couple weeks), JWT Popcharger/Stillen Z-tube, and 350z springs to lower my car.
Other than that, I would like
Twelve Drummers Drumming
Eleven Pipers Piping
Ten Lords a Leaping
Nine Ladies Dancing
Eight Maids a Milking
Seven Swans a Swimming
Six Geese a Laying
Five Golden Rings
Four Calling Birds
Three French Hens
Two Turtle Doves
and a Partridge in a Pear Tree
#6
#9
actually thinking about it for a long time i want to buy a pistol for protection, i want one with good stopping power so ill probably get a .45. can anyone recommend a good reliable one? i was thinking a Glock 21
Last edited by battosaii930; 11-29-2009 at 01:09 AM.
#12
Contributing Member
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: kennewick wa.
Posts: 2,324
what discussion dave about the .45 or stopping power? in a .45 caliber i like kimber but they are way too much imo. i also like 9mm becuase the slug is about the same size as a .357, .380 .38 and a few others. the main differances are, shape of the slug, and caseing size which means more, or less punch depending on the caliber.
imo a 9mm luger provides the best ratio of slug size without too much over peritrtion. after all, you don't want to shot the bad guys infront of you and the people two blocks over too.
anyways, after much thought i've decided that i don't need anymore guns so that's off my list. also, considering that i'll have to buy these gifts myself, i may have to rethink the plasma cutter too.
imo a 9mm luger provides the best ratio of slug size without too much over peritrtion. after all, you don't want to shot the bad guys infront of you and the people two blocks over too.
anyways, after much thought i've decided that i don't need anymore guns so that's off my list. also, considering that i'll have to buy these gifts myself, i may have to rethink the plasma cutter too.
#14
well i wasnt asking for help on the caliber i wanted help on wich gun is good and reliable. one that can be stored and for long periods of time and still fire when i need it to.
i was thinking a glock 21 but maybe there is something better ive looked online and the glock is about $500 so it is pricey for me but i may get it
i was thinking a glock 21 but maybe there is something better ive looked online and the glock is about $500 so it is pricey for me but i may get it
#15
where to start....
This is for redtop SR
----------------------------
Crower 272 cams
HKS springs and retainers
Rocker arm stoppers
HKS headgasket
OEM rings and bearings
Valve seals
Complete gasket kit
Electronic Boost Controller
Port and Polished head with 3 angle Valve job
ARP head studs
Re-valving on my super drifts
Works VS-KF wheels
5 lug conversion with 300ZX brakes
Rear widebody overlays (have widebody fenders already for front)
and a tune for my EMS running 18lbs of boost with my baby turbo. estimated 300hp @ crank.
This is for redtop SR
----------------------------
Crower 272 cams
HKS springs and retainers
Rocker arm stoppers
HKS headgasket
OEM rings and bearings
Valve seals
Complete gasket kit
Electronic Boost Controller
Port and Polished head with 3 angle Valve job
ARP head studs
Re-valving on my super drifts
Works VS-KF wheels
5 lug conversion with 300ZX brakes
Rear widebody overlays (have widebody fenders already for front)
and a tune for my EMS running 18lbs of boost with my baby turbo. estimated 300hp @ crank.