300ZX 30mm brake swap, ES bushings, MR 3” SS Exhaust, STB, S13 drivers seat

Thread Tools

Search this Thread

04-15-2005, 10:33 PM

lean

Registered User

Thread Starter

Join Date: Sep 2004

Location: Michigan

Posts: 4

300ZX 30mm brake swap, ES bushings, MR 3” SS Exhaust, STB, S13 drivers seat

Z32 Brake conversion
$525

Includes (and how much I paid for each):

Front 30mm aluminum Z32 calipers $250
Brembo rotors Front and Rear $150
Porterfield RS4 pads Front and Rear $150
Project Silvia SS lines Front and Rear $125
OE Nissan Shim Kit $20
5mm Wheel spacers $20
All caliper pins, clips, retainers, fittings and some caliper lube.

Everything is brand new and never used except the rear rotors and pads that were installed the night before my 240 was totaled. They have like 20 miles on em. I took the pads and rotors back off and marked which side the pads and rotors came off of. The front Z32 rotors are already professionally drilled for a 4 lug pattern and can still be used if you have the 5 lug conversion. The 5mm wheel spacers are included to let stock wheels fit over the calipers. I’ll load each caliper with the pads for you. I’ve used the Porterfield RS4 pads in other cars for the street and track and will never use anything else. Absolutely amazing pads. The only thing you’ll need is some $5 brake fluid from an auto store and you’ll be all set! I paid about $725 for all of this stuff but don’t have a 240 anymore.

Price for everything above is $525 and I’ll split the cost of shipping to the lower 48 states. Please don’t give me a lowball “shipped” price. This stuff is heavy, so I take care of half of it for ya!

$525 is a VERY fair price for the perfect condition, brand of parts used and the completeness. I’m taking a $200 hit on this stuff.

Megan Racing 3” stainless steel cat-back
SOLD

In good condition. Very shinny.

There’s one or two small dings in it that can’t even be seen when it’s installed on the car. It was only on my car for a few months and sounded very nice. The welds on the MR exhausts are outstanding and have a very good fit and finish. The stainless steel won’t let the exhaust rust either.

The exhaust will be shipped in it’s two-piece configuration to make it more compact and reduce shipping. Like above, I’ll split the actual shipping with the buyer.

Energy Suspension Hyper Flex S13 bushing set
$60 shipped

Comes with all bushings in the set except front sway bar and TC rod pieces. Comes with the supplied instructions and grease. Ran me about $110 new.

S13 Drivers seat
$50

This sucker is clean as a whistle. Not a single rip, tear, burn mark or wear spot on the entire seat. Sucker looks brand new. The indent marks on the seat bottom are from something sitting on the foam for a couple weeks before I took the pictures.

Rear Strut Brace
SOLD

Not sure of brand, I painted it graphite to be less flashy. The color looks goooood. It’s also a part I installed the night before the car was totaled. Figures..

I accept PayPal and money orders. I have perfect ebay feedback, I’m a 75+ verified member of PayPal and I own a Honda and Volkswagen parts company that’s been in business since 2003, so you can be sure I’m a trustworthy seller.

Last edited by lean; 04-19-2005 at 10:27 PM.