F/S 1989 240sx K24E and S14 Sr20DET, custom manifold, turbo
#1
F/S 1989 240sx K24E and S14 Sr20DET, custom manifold, turbo
OK this is what I have for sale:
1989 240sx with 152,000 miles on well taken care of K24E motor that runs fine
new plugs and Polished Injen intake
New thermostat and thermostat housing
Inside is stripped accept for dash and seats, everything works, AC
Blue Paint is in good condition except for little scratch and dent in back
Also S14 SR20DET black top with transmission only, no ECU or harness
Custom made manifold here are some details on it:
Hi –Rise style
T/3 inlet flange
External waste gate flanged for 35mm Tial
Primary runners are 1.65 inches
Has welded in brace
And protective black coating
Custom T3/T4 ITS (innovative turbo systems)
Turbine:
Inducer diameter is 2.439 inches equivalent to a turbonetics T3 stage 5
Compressor:
3 inch exducer diameter
2.230in inducer diameter
Equivalent to 57 trim T04E compressor
Turbo and manifold are new and never used; the engine is in very good condition. I have pictures of everything if you would like to see them send me an email at altima8a0s8rgtr@hotmail.com
This set up will be good for at least 500-550
Please make and offer!!!!!!!!!!!!!!!!!1
http://www.imagestation.com/mypictur...ption=tonycar9
http://www.imagestation.com/mypictur...ption=tonycar7
http://www.imagestation.com/mypictur...ption=tonycar4
http://www.imagestation.com/mypictur...ption=tonycar6
http://www.imagestation.com/mypictur...caption=turbo4
http://www.imagestation.com/mypictur...caption=turbo2
http://www.imagestation.com/mypictur...caption=turbo1
http://www.imagestation.com/mypictur...tion=manifold4
http://www.imagestation.com/mypictur...tion=manifold3
http://www.imagestation.com/mypictur...tion=manifold2
http://www.imagestation.com/mypictur...tion=manifold1
1989 240sx with 152,000 miles on well taken care of K24E motor that runs fine
new plugs and Polished Injen intake
New thermostat and thermostat housing
Inside is stripped accept for dash and seats, everything works, AC
Blue Paint is in good condition except for little scratch and dent in back
Also S14 SR20DET black top with transmission only, no ECU or harness
Custom made manifold here are some details on it:
Hi –Rise style
T/3 inlet flange
External waste gate flanged for 35mm Tial
Primary runners are 1.65 inches
Has welded in brace
And protective black coating
Custom T3/T4 ITS (innovative turbo systems)
Turbine:
Inducer diameter is 2.439 inches equivalent to a turbonetics T3 stage 5
Compressor:
3 inch exducer diameter
2.230in inducer diameter
Equivalent to 57 trim T04E compressor
Turbo and manifold are new and never used; the engine is in very good condition. I have pictures of everything if you would like to see them send me an email at altima8a0s8rgtr@hotmail.com
This set up will be good for at least 500-550
Please make and offer!!!!!!!!!!!!!!!!!1
http://www.imagestation.com/mypictur...ption=tonycar9
http://www.imagestation.com/mypictur...ption=tonycar7
http://www.imagestation.com/mypictur...ption=tonycar4
http://www.imagestation.com/mypictur...ption=tonycar6
http://www.imagestation.com/mypictur...caption=turbo4
http://www.imagestation.com/mypictur...caption=turbo2
http://www.imagestation.com/mypictur...caption=turbo1
http://www.imagestation.com/mypictur...tion=manifold4
http://www.imagestation.com/mypictur...tion=manifold3
http://www.imagestation.com/mypictur...tion=manifold2
http://www.imagestation.com/mypictur...tion=manifold1
Last edited by asr702; 02-19-2004 at 09:44 AM.
#3
#6
Thread
Thread Starter
Forum
Replies
Last Post
WhoDiddy
Turbo Motor
10
02-02-2006 07:45 PM
Komedy
Private For Sale / Wanted
3
08-13-2005 10:50 PM
asr702
Private For Sale / Wanted
1
10-09-2004 09:19 PM
asr702
Private For Sale / Wanted
1
09-02-2004 12:28 AM