I have my 1990 240sx with an RB20DET swapped in for sale. The motor is out of an R32 skyline GTSt, it's a 2.0L inline 6 turbo with 220hp factory.

Engine mods..
Blitz Access ECU
T3 Turbo
2.5 inch turbo back exhaust
M's intake
Polished; cam covers, cam gear cover, BOV, and CAS
Intake ports ported a little and polished(couldn;t touch the valve before, now you can)

Interior
Very clean interior, normal wear spot on the drivers seat, not that bad
Autometer EGT gauge and water temp gauge
Spearco boost gauge, all mounted on the center of the dash
R32 skyline tach installed into the stock 240sx cluster
R32 skyline floor mats
Broadway 270mm mirror
leather shift boot

Exterior
Primered black
Nismo rear valances
Shaved wing holes
Factory front lip
Lowered 3 inches

Wheels
Factory 95 240sx steelies with hub caps

Condition
The car is in overall good condition, I got rid of most of the little dents when I primed it, the chassis has about 135K on it, motor has a proven 52K on it. Motor has been torn down once by me to check everything over, no detonation on the pistons, head is very clean. I"m thinking that the cams aren;t stock as well, the ones in it have markings on it that the factory ones don't, thats the downside of buying a clip, not knowing what exactly you have. I did the swap in my garage, very clean swap, motor is spotless. The car will be ready to leave me in about a week and a half. I have a few little odds and ends to tie up, and she's ready to go. I primed it cause it was going to be my drift car, but now I need to go to school so drifting isnt that important anymore, it makes a great drift car, as well and a decent drag car.

Reason for selling...
I love this car, I put countless hours of labor into this car, I checked over everything before installing the motor. I'm asking 8500. I'm selling it because I'm moving out of my house and starting school and need money to do so. Alot can be done with this car. I have a timeslip around here somewhere of it when I first completed the swap, with a clogged up fuel filter, stock boost, no traction and shifting at 6K out of the 8700RPM rev limit. It hit a 14.6@97mph with a 2.7 60'. I set up a photo album for pics of everything.

If interested E-mail me at Nismo241@comcast.net or AIM @ NISMObuttnutz. Also, Im located in Portland Oregon.

here is a link to the album..... http://www.imagestation.com/album/?id=4288907379

 

sounds good to me...would i be able to drive it from oregon to michigan area?? is it reliable?


i dont have the money just yet...but if you get no offers...i might be able to sell my car and get yours. hehe..

 

Yes you would be able to drive it that far. The longest trip this car has been on is from portland to 26 miles north of seattle and back in one day, which is about 750-800 miles or so. It gets awesome gas mileage on the freeway as long as you don't get on it all the time, then you can watch the gas gauge go down. It's very reliable as long as you dont overboost it like I did on my first RB20. I mainly have window shoppers, at this point. I am taking the car to the body shop sometime next week or week after to have them spray another coat of primer on it instead of using a rattle can. Looks blotchy now, won't when I take it in.

 

eeeeeeeeeewwwwwwwwww!!! steelies with hubcaps?!??!

 

i'm buying a 95 right now...and i'm moving into a new house with like a warehouse garage...but see you need money fast....so i hope you are still on the forums...i'd like to know alot about your engine swap....

 

Actually I have a set of 15 inch P10 G20 wheels for it now. The steelies are going to be sold or sold with the car as extra set.

 

hahaha for a second we had the same amount of posts


is the rb20det better than the sr20det?

 

My turn:

Come on man. If you dont have the skrill...dont bother!!! This is an awesome car worth every cent. We are happy that you are buying a home. We are happy that you bought an S14. If you want to know which is better...do a search. Keep this thread on topic. I am sure you wouldnt want someone ****ting in your for sale ad. "eewwwwwwww steelies." Grow up

 

on that bro