Parting out 1990 240sx
I have a silver 240sx 5-speed fastback to part out or sell the whole thing. It hit some trees pretty hard on the right side so none of that stuff is any good except the rear suspension but the subframe is toast. The hatch is bent and not broken, the windshield and hood are bad. All interior is good, never smoked in, and its blue. The door sills have black carpet in them along with the glovebox. And the car has a clean title. Ask for anything you need
|
is your speedo digital or normal.....I have hud that do not work .looking for reg speedo if yes how much you want for it
|
It's not digital and doesn't have HUD. Do you need the whole cluster or just the speedo. If you need just the speedo You have to buy the whole cluster. Make an offer.
|
Is the engine good ?, How many miles ?, what would be the price ?, any oil leaks or anything ?
|
Im interetsed in the the driveshaft whats your price?
|
The engine is good, but has a little oil coming from the valve gasket. The engine was rebuilt at about130k and now it has 196k. If it has been sitting for a while the cam chain clatters for a couple seconds on cold start but I've heard lots of them do that. If you need the intake man. and stuff attached to it some of the sensors are broken cause the engine whacked the right side when the car whacked some trees. If you want you can have the whole car for $600 or the motor for $350 because I don't have the proper equipment to take it out.
|
I'll take $60 for the driveshaft plus shipping.
|
How much for the injectors?
|
$45 for the injectors and they have new seals on them, shipped.
|
How much for the exhaust and intake manifold? Would it fit my 1989 KA24E? I'm in 92883
Thanks |
$25 for the intake manifold and 25 for the exhaust. Shipping will pry be around $10 or so.
|
hood hinges??? 92154
|
The right hinge is excellent, but the left is a little tweaked it doesnt affect the hingingness any. I'm sure you could bend it a little. $20 shipped
|
50.00 for the speedo and do you have the drivers door for sale
|
50 sounds good. And yes the door is for sell. It is power window. I don't think it has any dings in it but there is a smallchip of paint off it. $100 for the door or $150 for the door and the buttons and switches and door cover.
|
I badly need the engine wiring harness ... Howbout 75 shipped?? Uncut too please, there are insulated wires that cannot be cut.. That's what happened to my 90 fb
|
sidewaysilvia I'll see what i can do
|
Appreciated Mr. Cracker. .heh you mentioned some of the sensors and parts of the engine bay were damaged.. Is the wiring harness intact with nothing broken or at least moderate damage?? These aren't very hard to take out.. I've done it twice already with no prior experience.. Let me know soon.. Thanks CRACKER!!!!!
|
The TPS is busted pretty badly and there is a sensor on the back of the intake plenum that is brass with a spring and needle in it is busted. The wiring harness looks fine I'll start yanking it tonight sidewaysilvia.
|
All times are GMT -7. The time now is 08:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands