Parting out 1990 240sx
06-11-2004, 05:58 PM
#1
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
Parting out 1990 240sx
I have a silver 240sx 5-speed fastback to part out or sell the whole thing. It hit some trees pretty hard on the right side so none of that stuff is any good except the rear suspension but the subframe is toast. The hatch is bent and not broken, the windshield and hood are bad. All interior is good, never smoked in, and its blue. The door sills have black carpet in them along with the glovebox. And the car has a clean title. Ask for anything you need
06-15-2004, 10:21 AM
#2
Registered User
Join Date: Jan 2004
Location: Las Vegas
Posts: 20
is your speedo digital or normal.....I have hud that do not work .looking for reg speedo if yes how much you want for it
06-15-2004, 05:09 PM
#3
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
It's not digital and doesn't have HUD. Do you need the whole cluster or just the speedo. If you need just the speedo You have to buy the whole cluster. Make an offer.
06-15-2004, 11:08 PM
#4
Registered User
Join Date: Jun 2003
Location: ohio
Posts: 63
Is the engine good ?, How many miles ?, what would be the price ?, any oil leaks or anything ?
06-16-2004, 11:48 AM
#5
Registered User
Join Date: Mar 2004
Location: Gables
Posts: 7
Im interetsed in the the driveshaft whats your price?
06-16-2004, 06:44 PM
#6
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
The engine is good, but has a little oil coming from the valve gasket. The engine was rebuilt at about130k and now it has 196k. If it has been sitting for a while the cam chain clatters for a couple seconds on cold start but I've heard lots of them do that. If you need the intake man. and stuff attached to it some of the sensors are broken cause the engine whacked the right side when the car whacked some trees. If you want you can have the whole car for $600 or the motor for $350 because I don't have the proper equipment to take it out.
06-16-2004, 06:45 PM
#7
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
I'll take $60 for the driveshaft plus shipping.
06-17-2004, 05:07 PM
#9
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
$45 for the injectors and they have new seals on them, shipped.
06-17-2004, 11:29 PM
#10
Registered User
Join Date: Jun 2004
Location: California
Posts: 6
How much for the exhaust and intake manifold? Would it fit my 1989 KA24E? I'm in 92883
Thanks
Thanks
Last edited by RR5; 06-17-2004 at 11:34 PM.
06-18-2004, 05:38 AM
#11
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
$25 for the intake manifold and 25 for the exhaust. Shipping will pry be around $10 or so.
06-18-2004, 10:13 AM
#12
Registered User
Join Date: Apr 2004
Location: SD CALI YO
Posts: 8
hood hinges??? 92154
06-18-2004, 04:29 PM
#13
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
The right hinge is excellent, but the left is a little tweaked it doesnt affect the hingingness any. I'm sure you could bend it a little. $20 shipped
06-19-2004, 03:00 PM
#14
Registered User
Join Date: Jan 2004
Location: Las Vegas
Posts: 20
50.00 for the speedo and do you have the drivers door for sale
06-19-2004, 10:24 PM
#15
Registered User
Thread Starter
Join Date: May 2004
Location: Athens, GA
Posts: 44
50 sounds good. And yes the door is for sell. It is power window. I don't think it has any dings in it but there is a smallchip of paint off it. $100 for the door or $150 for the door and the buttons and switches and door cover.
