S13 RHD Clip + KA24E FOR SALE
01-18-2006, 05:01 PM
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
KA24E FOR SALE
-=CLIP SOLD=-
Hey guys, I just got my KA24E engine out of my car and want to sell it. It's got ~180k miles on her and I will include the ecu and SOHC gauge cluster but no wiring harness (sensors cut on transmission). It is an auto transmission. When I pulled it about two months ago she ran great and didn't burn any oil. I had the car for about 4 months prior to pulling the engine and it gave me no problems except the thermostat stuck shut once. (temp. went up 3/4 way, usually stayed at 1/2 way). The engine has a little timing chain noise at about 2500rpm, but thats normal for this engine. I had it revved to 4500rpm once and it pulled great to that point, but I never had it any higher. Since the engine has been pulled, it has sat in a heated room besides my car on an engine hoist. It also includes the tranny crossmember, fan blades, and ac compressor bracket (sorry, no compressor... using it on the sr!). No major oil leaks that I can see are present, just a little wet around the front of the valve cover and looks like road grime around the bottom, and oil is still in the engine.
I am asking $175 for the engine and ecu, and $100 for the auto tranny. I will take $225 for both!
Got a set of Kei Office Coilovers from my clip, I'll take $150 shipped to whoever needs parts or an extra front coilover.
I will ship but buyer must arrange shipping, and for engine/clip to be picked up or dropped off at a terminal within 20 or so miles of zip code 12205 (Albany, NY).
Contact Info
Name: George Govel
Address: 1932 Central Ave.
Colonie NY, 12205
E-mail: ebay172@yahoo.com
AIM SN: HardTrukr
Everything you see is what you get! If you need more info, just ask!
If you want just a part send me an email or post your inquiry here, I have a bunch of SOHC parts...
I will also consider partial trades + cash. I need gauges (egt, boost, oil press...), or some aftermarket goodies. Basically, if its not stock, I might consider it.
Hey guys, I just got my KA24E engine out of my car and want to sell it. It's got ~180k miles on her and I will include the ecu and SOHC gauge cluster but no wiring harness (sensors cut on transmission). It is an auto transmission. When I pulled it about two months ago she ran great and didn't burn any oil. I had the car for about 4 months prior to pulling the engine and it gave me no problems except the thermostat stuck shut once. (temp. went up 3/4 way, usually stayed at 1/2 way). The engine has a little timing chain noise at about 2500rpm, but thats normal for this engine. I had it revved to 4500rpm once and it pulled great to that point, but I never had it any higher. Since the engine has been pulled, it has sat in a heated room besides my car on an engine hoist. It also includes the tranny crossmember, fan blades, and ac compressor bracket (sorry, no compressor... using it on the sr!). No major oil leaks that I can see are present, just a little wet around the front of the valve cover and looks like road grime around the bottom, and oil is still in the engine.
I am asking $175 for the engine and ecu, and $100 for the auto tranny. I will take $225 for both!
Got a set of Kei Office Coilovers from my clip, I'll take $150 shipped to whoever needs parts or an extra front coilover.
I will ship but buyer must arrange shipping, and for engine/clip to be picked up or dropped off at a terminal within 20 or so miles of zip code 12205 (Albany, NY).
Contact Info
Name: George Govel
Address: 1932 Central Ave.
Colonie NY, 12205
E-mail: ebay172@yahoo.com
AIM SN: HardTrukr
Everything you see is what you get! If you need more info, just ask!
If you want just a part send me an email or post your inquiry here, I have a bunch of SOHC parts...
I will also consider partial trades + cash. I need gauges (egt, boost, oil press...), or some aftermarket goodies. Basically, if its not stock, I might consider it.
Last edited by YFZ460; 02-05-2006 at 09:30 AM.
01-23-2006, 09:41 AM
#2
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
Prices lowered and I will seperate the engine and tranny .
01-23-2006, 06:09 PM
#3
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
Ok, I just made up a list of what I will consider trades in whole or partial for:
good s13 front lip
clean driver door panel (grey; power windows)
cat-back exhaust (3" or bigger)
mudflaps
gauges
alum. radiator (sr20)
silicone coolant hoses
fan thermostat
complete 5-lugs
complete 300zx conversion
c/f parts
coilovers
struts/springs
bushings
sr20det parts (aftermarket manifolds, cams, etc...)
sr20det CAS
boost controller
turbo timer
alarm
If you have something else thats an oddball part or aftermarket, I may be interested!
...O.K. Will it make a difference if I throw in the JDM tissues and Autobachs reciept?
good s13 front lip
clean driver door panel (grey; power windows)
cat-back exhaust (3" or bigger)
mudflaps
gauges
alum. radiator (sr20)
silicone coolant hoses
fan thermostat
complete 5-lugs
complete 300zx conversion
c/f parts
coilovers
struts/springs
bushings
sr20det parts (aftermarket manifolds, cams, etc...)
sr20det CAS
boost controller
turbo timer
alarm
If you have something else thats an oddball part or aftermarket, I may be interested!
...O.K. Will it make a difference if I throw in the JDM tissues and Autobachs reciept?
Last edited by YFZ460; 01-23-2006 at 06:13 PM.
01-23-2006, 06:17 PM
#4
Registered User
Join Date: Jun 2003
Location: Harrisburg, PA
Posts: 8,440
I may be interested in the engine, can you get some more pics of it from all around?
01-23-2006, 07:30 PM
#5
Contributing Member
Join Date: May 2005
Location: Hershey, PA
Posts: 1,634
can you sell me just that shift ****? wierd request... but i need it 
01-24-2006, 10:47 AM
#6
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
Yeah tonight I should be able to get some pics of it. Do you want any specific pictures of it? Its still covered in grime but I can clean it before pics are taken....
nsn - You want the whole auto shift **** from the part where it screws to the body up? Its still all together and in great shape if you still want it. How's 20 bucks shipped sound? E-mail me at ebay172@yahoo.com for payment info, etc...
nsn - You want the whole auto shift **** from the part where it screws to the body up? Its still all together and in great shape if you still want it. How's 20 bucks shipped sound? E-mail me at ebay172@yahoo.com for payment info, etc...
01-24-2006, 12:37 PM
#7
Contributing Member
Join Date: May 2005
Location: Hershey, PA
Posts: 1,634
Originally posted by YFZ460
nsn - You want the whole auto shift **** from the part where it screws to the body up? Its still all together and in great shape if you still want it. How's 20 bucks shipped sound? E-mail me at ebay172@yahoo.com for payment info, etc...
nsn - You want the whole auto shift **** from the part where it screws to the body up? Its still all together and in great shape if you still want it. How's 20 bucks shipped sound? E-mail me at ebay172@yahoo.com for payment info, etc...
who drives that?
01-24-2006, 01:13 PM
#8
Registered User
Join Date: Jun 2003
Location: Harrisburg, PA
Posts: 8,440
Originally posted by YFZ460
Yeah tonight I should be able to get some pics of it. Do you want any specific pictures of it? Its still covered in grime but I can clean it before pics are taken....
Yeah tonight I should be able to get some pics of it. Do you want any specific pictures of it? Its still covered in grime but I can clean it before pics are taken....
01-24-2006, 04:18 PM
#9
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
A few drag racers around here do.... 
. Nah man, sorry I'm using that **** (nice leather one).
Hope these pics do s13, oh and I forgot to mention I have the belts for it as well, and they look to be in good shape. The airbox and intake I will sell for 50 extra. It includes the MAS and uncut airbox with good stock filter. The fan blades and manifold can be included if you want them for nothing:
And finally.... the Japanese tissues and Autobachs reciept... Priceless.
. Nah man, sorry I'm using that **** (nice leather one).Hope these pics do s13, oh and I forgot to mention I have the belts for it as well, and they look to be in good shape. The airbox and intake I will sell for 50 extra. It includes the MAS and uncut airbox with good stock filter. The fan blades and manifold can be included if you want them for nothing:
And finally.... the Japanese tissues and Autobachs reciept... Priceless.
01-26-2006, 03:45 AM
#10
Registered User
Join Date: Jun 2003
Location: Harrisburg, PA
Posts: 8,440
how much would you want for just the engine without tranny?
01-26-2006, 08:04 AM
#11
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
Does $200 sound ok to you? If you want, contact me on AIM: HardTrukr or email me at ebay172@yahoo.com to negotiate on the price...
01-28-2006, 02:48 PM
#12
Registered User
Join Date: Jun 2003
Location: Harrisburg, PA
Posts: 8,440
sorry I haven't replied, I'll hit you up on aim or email you then about the engine, I gotta finish helpin' a friend with his car
01-28-2006, 02:59 PM
#13
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
Haha, its no problem man. I'm not dying for money...
Last edited by YFZ460; 02-28-2006 at 04:54 PM.
01-30-2006, 03:30 PM
#14
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
Bumpity bump. Engine still for sale, clip is gone. Got some SOHC parts too:
P/S Lines (sensor wire ripped....)
P/S Pump
Complete Stock Intake (w/ MAF)
Downpipe (good condition)
SOHC cluster (176k or something like that)
Automatic Shifter Unit (complete, great shape)
Also have a descent exhaust, crush bent but it looks like 2.5" piping. First muffler is a little rotted at the exit. Good base for a new exhaust. Great condition galvanized steel tubing. Cat seems to be good too, not clogged and it could be shipped.
Still got the coilovers too if anyone is interested...
Hit me up with offers!
I can get pictures, just ask if you're interested.
Also, I'm looking for used, good condition DOHC p/s lines and a Walbro 255lph pump if anyone wants to trade, for both I will trade the engine done deal! (I consider both about $100 each)
P/S Lines (sensor wire ripped....)
P/S Pump
Complete Stock Intake (w/ MAF)
Downpipe (good condition)
SOHC cluster (176k or something like that)
Automatic Shifter Unit (complete, great shape)
Also have a descent exhaust, crush bent but it looks like 2.5" piping. First muffler is a little rotted at the exit. Good base for a new exhaust. Great condition galvanized steel tubing. Cat seems to be good too, not clogged and it could be shipped.
Still got the coilovers too if anyone is interested...
Hit me up with offers!
I can get pictures, just ask if you're interested.
Also, I'm looking for used, good condition DOHC p/s lines and a Walbro 255lph pump if anyone wants to trade, for both I will trade the engine done deal! (I consider both about $100 each)
Last edited by YFZ460; 01-30-2006 at 06:30 PM.
02-05-2006, 09:24 AM
#15
Registered User
Thread Starter
Join Date: Oct 2005
Location: Upstate, NY
Posts: 125
Bump'n it up. Still got the KA24E for sale. It may be high milage but it ran great whe pulled, and it hasn't been sitting outside. She needs a home, and I'm starting to need the money!
Prices Dropped!
Prices Dropped!
Last edited by YFZ460; 02-28-2006 at 04:53 PM.
