new guy wants input
new guy wants input
hey there new car new to the site. actually bought the car before i new about any of the hype. go figure i liked the look and thought it was good on gas. well like any car monkey i have to modify. i new a new throwout so am changinh the clutch. figure i will go with complete new exhaust and intake to start. what do you all recomend. i have seen crazy deals on ebay but would like some input first.
for the intake just get a good filter (cone style) and put it on the end of your intake after you remove the intak box ect...for an exhaust and good catback 2.5-3.0 inch will work depending on whether ud rather have the torque or the high end...headers make a huge difference on the KA so i would recommend getting a new header to compliment that exhaust...for the clutch i would go with a stage 2, i always say go ahead and do it right the first time, that should hold you up for a while..for brands i personally love exedy but act, clutchmasters, spec will all work well..just dont buy ebay on the clutch..i wouldnt recommend ebay for pretty much everything, certain parts dont matter though..
well since ur changing the clutch i highly recomend going for a lightwieght flywheel since you'll already have the tranny out in my opionin fidanza is the best. i dont know about other people on this forum since im new too but use royal purple oil. i used it in my car and u could feel a difference in pepyness. and i dont know when the last time ur spark plus where change but ngk g seris platnum help it run better but i dont knwo what year ur car and i just got my 240 so im not sure about this either and u have to be carefull becuase on alot of obd I cars they dont like platnum and will cause missfire
thanks i was thinkn mostl the same you all were. the flywheel was a great suggestion. the car is a 95 and do you really think that just a cone filter with open box is good enough? also has anyone seen an oil filter relocater the filter on this engine is in the worst spot i always get oil on the block.
something to keep in mind when looking for a header is to get a 4-2-1. i have a obx on my '89 and am very happy with it. i had a small problem getting the O2 sensor back on but i don't know if the later models have the same problem . about $200 shipped off of egay is a pretty good deal.
Last edited by jramosthe1st!; Apr 16, 2007 at 03:20 PM.
thanks i was thinkn mostl the same you all were. the flywheel was a great suggestion. the car is a 95 and do you really think that just a cone filter with open box is good enough? also has anyone seen an oil filter relocater the filter on this engine is in the worst spot i always get oil on the block.
for the oil relocater, just search around there around. probally have em at these places
enjukuracing.com
projectnissan.com
Read this http://www.jspec.com/240sxfaq.html
Read this http://www.jspec.com/240sxfaq.html
Thread
Thread Starter
Forum
Replies
Last Post



