FS: 93 nissan s13 ka turbo(sr20 killer) w/ silvia frontend for 6300 obo
02-12-2007, 10:19 PM
#1
Registered User
Thread Starter
Join Date: Oct 2006
Posts: 5
FS: 93 nissan s13 ka turbo(sr20 killer) w/ silvia frontend for 6300 obo
exterior:
Paint job Jet black
S13 complete front end
89-90 front lip painted
Rear emblem/lock s13 flip up
240sx se wing
Interior:
Jdm S13 Silvia hicas steering wheel (rare)
Jdm S13 floor mats with Silvia badges
Din Dash gauge pod
Electronics:
Apexi SAFC piggy back system
Aem Wideband
Boost gauge
A/F ratio gauge to monitor the ECU
Battery relocation to the trunk
Walbro 255lph fuel pump
Pioneer CD player
Performance technique speakers all around
DHD 400 watt amp
JL Audio 8” subwoofer
Basic Alarm system
Apexi custom turbo timer
Engine:
Complete full oem rebuild 1300 miles on motor!!!!!!
.20 over pistons/rings
New main and rod bearings
Cometic 1mm think metal head gasket
Head job- valves, springs, and seals
Butterfly removal, holes are shut
Egr block off plate
SSAC Bottom Mount Manifold
GT28RS “Disco Potato” ball bearing 7psi (should be tuned for 12 when motor breaks in)
Dual Chamber dump pipe
Full 3inch turbo back exhaust with 4.5 inch tip
HKS air filter
FMIC Spearco, custom intercooler piping
Sr20det 370cc injectors-new O rings and bottom clips
Dual Electric fans, adjustable fan controller/ temp sensor
6 puck sprung Exedy clutch stage 3
Blitz SS style Blow off valve
12.5mm spark plug wires
I'll throw in a greddy oil catch can
Suspension:
KYB AGX adjustable struts
Suspension Technique springs
Godspeed Front Rear sway bars
Front=30mm, Rear=28mm
Rear sub frame spacers, not those
pos cut in half spacer
PM me or IM me at japanesev35 or call me at 818 636 3457 my name is harout
Paint job Jet black
S13 complete front end
89-90 front lip painted
Rear emblem/lock s13 flip up
240sx se wing
Interior:
Jdm S13 Silvia hicas steering wheel (rare)
Jdm S13 floor mats with Silvia badges
Din Dash gauge pod
Electronics:
Apexi SAFC piggy back system
Aem Wideband
Boost gauge
A/F ratio gauge to monitor the ECU
Battery relocation to the trunk
Walbro 255lph fuel pump
Pioneer CD player
Performance technique speakers all around
DHD 400 watt amp
JL Audio 8” subwoofer
Basic Alarm system
Apexi custom turbo timer
Engine:
Complete full oem rebuild 1300 miles on motor!!!!!!
.20 over pistons/rings
New main and rod bearings
Cometic 1mm think metal head gasket
Head job- valves, springs, and seals
Butterfly removal, holes are shut
Egr block off plate
SSAC Bottom Mount Manifold
GT28RS “Disco Potato” ball bearing 7psi (should be tuned for 12 when motor breaks in)
Dual Chamber dump pipe
Full 3inch turbo back exhaust with 4.5 inch tip
HKS air filter
FMIC Spearco, custom intercooler piping
Sr20det 370cc injectors-new O rings and bottom clips
Dual Electric fans, adjustable fan controller/ temp sensor
6 puck sprung Exedy clutch stage 3
Blitz SS style Blow off valve
12.5mm spark plug wires
I'll throw in a greddy oil catch can
Suspension:
KYB AGX adjustable struts
Suspension Technique springs
Godspeed Front Rear sway bars
Front=30mm, Rear=28mm
Rear sub frame spacers, not those
pos cut in half spacer
PM me or IM me at japanesev35 or call me at 818 636 3457 my name is harout
02-12-2007, 10:38 PM
#2
Registered User
Join Date: Aug 2006
Location: buffalo grove, illinois
Posts: 6
very interested...can you please send additional photos to drtjmpr197@aol.com. who did the work? how is this thing running and where is it located. will it make the drive to chicago? any problems with the car?
Thread
Thread Starter
Forum
Replies
Last Post
brandenblaze
S-Chassis Newbie / FAQs Forum
10
01-26-2004 02:32 PM
