You can email me if you would like Chris@amsperformance.com

RC 1200cc's $350
-used in Ivan’s 9 sec KA-T for one event. Not enough fuel for 42rrrr, Was going to put in my car, but they are too big for my needs. These things are LIKE NEW.
http://agendachaos.com/images/100_3686.jpg
http://agendachaos.com/images/100_3687.jpg

MSD 6a $120
-used for about 2k miles
http://agendachaos.com/images/100_3698.jpg
http://agendachaos.com/images/100_3718.jpg

MSD blaster coil $40 dollars
-used the same as the 6al
http://agendachaos.com/images/100_3699.jpg

15" Evo 1 wheels with bfg Drag radials mounted on two $150
-15x6.5” 4x114 AND 5x114
-Older Advan’s mounted on other two. Advans are 205’s and the BFG DR’s are 235/60/15’s.
-Drag radials are a couple years old, but still have some good tread on them. They are right at the wear markers, which is acceptable for a drag radial.
http://agendachaos.com/images/100_3683.jpg

Cbr f4i coils no boots no harness $40
-still good, just some extras

Ams gt33 50trim $650
-Only a few thousand miles on this bad boy. Made 450whp on my s13. Very similar to a 50 trim. My car also went 10.30 @131 on this turbo (auto c4 transmission) .64a/r back side. Oil cooled housing. No shaft play turbo is basically brand new.
http://agendachaos.com/images/100_3705.jpg

Pte 780cc injectors $200
-Used for about the same amount of time that the turbo was. Only a few thousand miles on them. They work well and there is no flow issues that I can tell from reading the plugs.
http://agendachaos.com/images/100_3709.jpg

Subaru ARP wheel studs, bought by mistake $75
-just what it is, my loss, your gain.

S13 short shifter ebay $40
-Typical ebay short shifter, this is the complete assembly, not just the shaft and bushings.

Precision core and hot side piping w/ tial bov flange $450
-This only has a few thousand miles on it as well. This core is AWESOME. Excellent heat rejection capabilities. I was amazed all year at the intake temps this core was capable of. Hot side pipe included with bov flange already welded. Tial BOV NOT included. Couplers ARE included. Mounting brackets for s13 ARE included. 31.50x8.00x3.50 -600HP precision turbo core. $450 NEW core alone.
http://agendachaos.com/images/100_3702.jpg
http://agendachaos.com/images/100_3708.jpg

Panasonic CQ 8400 cd/mp3 player w/equalizer $150
http://www.amazon.com/Remanufactured.../dp/B000AME6BW
Still works great, have faceplate case. Taking it out for weight.

5.25" rear two ways from rockford fosgate $75
-Bomb *** speakers! They sound good, came with the car when I bought it. Good condition, not very old. Price is for a pair of speakers.
http://agendachaos.com/images/100_3694.jpg
http://agendachaos.com/images/100_3696.jpg

Nissan/Honda oil filter adapter sandwich plate.
-Took off so I could swap in a sandwich plate compatible with an oil cooler. No known issues $40
http://agendachaos.com/images/100_3714.jpg

Autometer oil pressure sender $30 obo
-0 miles on it, swapped it out with another one b/c I thought it was bad, gauge was bad. This sender is still good and practically brand new! Don’t know what its worth
http://agendachaos.com/images/100_3716.jpg

S13 Canadian Day-Time running lights! $60
-These things are the bomb shizzle. I am getting rid of them because they will add extra weight I don’t need. No bulbs or wiring included, but can be found easily.
http://agendachaos.com/images/thumbnails/100_3720.jpg
http://agendachaos.com/images/thumbnails/100_3721.jpg

Genuine sparco steering wheel hub $40
-Will fit s13 s14 s12 maxima and probably some other stuff. Rediculously expensive brand new because it will still operate your turn signals unlike the cheapo ebay hubs.
http://agendachaos.com/images/100_3722.jpg

Sparco black 3 point bolt in harness
-Can/is being used with stock seat belt still in place (s13). Good working order, not been used that long. Helps to keep you in the seat under increased g forces. I need to move up to a 5pt. $125
http://agendachaos.com/images/100_3711.jpg

Sparco tool bag $45
Lots of cool pockets and internal fold out thing to hold every basic hand tool you can think of. Converts to backpack with included straps. Little bit dirty, but I’m sure it could be cleaned up. Works great for track days or traveling mechanic work.
http://agendachaos.com/images/100_3717.jpg

TurboXS AFR monitor and Knock Amp $50
-I have lots all the cables and instructions for this thing. Could be useful to someone who wants to track the parts down and use it for some good diy tuning.
http://agendachaos.com/images/100_3723.jpg

17" gram lights 57pro w/ falken Azenis 90% $1400
-Hyper Silver (greyish) with polished lip
-17x8 +35 4x114
-255/40/17 rt 615’s in back 235/45/17 up front.
-Not perfect, but no major blemishes. Meant to be driven on.
-Used for a couple thousand miles and one track day. Cleaned up after each use.
-Will ship at buyer’s expense.
http://amsteam.net/files/3/240wheels1.jpg
http://amsteam.net/files/3/240wheels3.jpg
http://amsteam.net/files/3/240wheels4.jpg
http://amsteam.net/files/3/240wheels2.jpg

 

i made the post a whole lot better and added some things.

 

Gah... too bad I can't use the MSD equipment. S14 ignition system FTL.

 

where can i get a intake manifold like ivans?

 

hey chris, do you still have that sandwich plate? Whats the size of the holes?