240sx Race Parts F/S
01-05-2009, 09:57 AM
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Atlanta, GA
Posts: 0
240sx Race Parts F/S
Having to Part out my SCCA ITA S13 240sx : New Prices
Ground Control Advance Design Coil overs/shocks with 400lb fr/275 lbs rear springs
Complete with everything you need to bolt on . Pillowball Ground Control camber plates in front. Tien Pillowballs rear tops. Rears freshly rebuilt. Fronts fresh nitrogen charge 1500.00 plus shipping
Everything in good shape!
Located in Atlanta. E-mail Tristan.Smith@Turner.com for more information and pictures.
also for sale (plus shipping)
Brand New Full SCCA IT Spec Built Nissan KA24E motor. Run at two events, so it is ready to go. Pulling like a freight train.
Sunbelt prepped Head
.040 overbore
Higher Compression Flat top pistons
Balanced/Blueprinted by Don Dixon
Custom Built 7 Qt oil pan
Crank Scrappers and windage tray
Brand New Oil Pump
best of everything!
2400.00 or OBO
Sunbelt Racing Tuned KA24e ECU 200.00
"Zoom" Clutch and Pressure Plate in excellent condition SOLD
Whiteline sway bars front and back. need a coat of paint. SOLD
Front Hubs with 1/2 Moroso 3" wheel studs and lug nuts
SOLD
Rear Hubs with 1/2 Moroso 3" wheel studs and lug nuts
SOLD
aluminum (H&R) 20mm wheel spacers SOLD
Three sets of ROH Reflex wheels 15 x 7, 4 x 114 +38 offset
Set One with brand new Hoosier 225 45 15 total of 2 sessions and 1/2 race on them
SOLD
Set two with older Hoosiers (same size as above)
SOLD
Set Three with Toyo R1, full tread; used as intermediates. Still in great shape
SOLD
(4) 15x6 stock Nissan 7 spoke wheels (wo tires) SOLD
Rear Bumper Cover
Rear OEM Coupe Nissan Window
Coupe Taillights
Coupe Trunk Lid SOLD
Coupe Trim (between tailights and Bumper cover)
Both Rear Quarter Side Windows
Starter sold
Power steering pumps/line
Transmission; 50.00 Pick up only.
Ground Control Advance Design Coil overs/shocks with 400lb fr/275 lbs rear springs
Complete with everything you need to bolt on . Pillowball Ground Control camber plates in front. Tien Pillowballs rear tops. Rears freshly rebuilt. Fronts fresh nitrogen charge 1500.00 plus shipping
Everything in good shape!
Located in Atlanta. E-mail Tristan.Smith@Turner.com for more information and pictures.
also for sale (plus shipping)
Brand New Full SCCA IT Spec Built Nissan KA24E motor. Run at two events, so it is ready to go. Pulling like a freight train.
Sunbelt prepped Head
.040 overbore
Higher Compression Flat top pistons
Balanced/Blueprinted by Don Dixon
Custom Built 7 Qt oil pan
Crank Scrappers and windage tray
Brand New Oil Pump
best of everything!
2400.00 or OBO
Sunbelt Racing Tuned KA24e ECU 200.00
"Zoom" Clutch and Pressure Plate in excellent condition SOLD
Whiteline sway bars front and back. need a coat of paint. SOLD
Front Hubs with 1/2 Moroso 3" wheel studs and lug nuts
SOLD
Rear Hubs with 1/2 Moroso 3" wheel studs and lug nuts
SOLD
aluminum (H&R) 20mm wheel spacers SOLD
Three sets of ROH Reflex wheels 15 x 7, 4 x 114 +38 offset
Set One with brand new Hoosier 225 45 15 total of 2 sessions and 1/2 race on them
SOLD
Set two with older Hoosiers (same size as above)
SOLD
Set Three with Toyo R1, full tread; used as intermediates. Still in great shape
SOLD
(4) 15x6 stock Nissan 7 spoke wheels (wo tires) SOLD
Rear Bumper Cover
Rear OEM Coupe Nissan Window
Coupe Taillights
Coupe Trunk Lid SOLD
Coupe Trim (between tailights and Bumper cover)
Both Rear Quarter Side Windows
Starter sold
Power steering pumps/line
Transmission; 50.00 Pick up only.
Last edited by TRexRacer; 02-02-2009 at 09:47 AM.
Thread
Thread Starter
Forum
Replies
Last Post
