over 50 parts new to sell
#1
over 50 parts new to sell
i bought a 240sx and rebuilt the engine when i went to turn it, i saw that the cylinders fill full oil do to the rings not seated right. so i want to sell everything.
the engine
-hot tanked
-hone and resurface (head too)
-rebuilt head with new Supertech dual springs, titanium retainers and ferrea values, seals ,shims
-new timing chain and components
-new water pump and termostat
-high flow oil pump switch comes on the front timing cover
-main and rod bearings
-pistons rings are new but i install them wrong
-cometic head gasket
- arp main studs
-ngk spark plugs and wires
-distrubitor and rotor
-all belts
-new starter and alternator
-new radiator and hoses
-fan, temp and oil switchs
-act clutch kit
_light weight crank pully and fidanza aluminum flywheel. b&m short shifter
-new rack & pinion
_brake and clutch master cylinders also the clutch slave
_motor and trany mounts
-fuel filter
the car has 50mm rear over fenders on it already. i try to put up pictures when i figure out how.
the engine
-hot tanked
-hone and resurface (head too)
-rebuilt head with new Supertech dual springs, titanium retainers and ferrea values, seals ,shims
-new timing chain and components
-new water pump and termostat
-high flow oil pump switch comes on the front timing cover
-main and rod bearings
-pistons rings are new but i install them wrong
-cometic head gasket
- arp main studs
-ngk spark plugs and wires
-distrubitor and rotor
-all belts
-new starter and alternator
-new radiator and hoses
-fan, temp and oil switchs
-act clutch kit
_light weight crank pully and fidanza aluminum flywheel. b&m short shifter
-new rack & pinion
_brake and clutch master cylinders also the clutch slave
_motor and trany mounts
-fuel filter
the car has 50mm rear over fenders on it already. i try to put up pictures when i figure out how.
Last edited by Oriaj24; 10-20-2006 at 06:35 PM.
#5
dont want to trade, i never got to use the any of the parts just to remind you. i'll sell the shifter for 180 shipped. the clutch and flywheel 450 shipped for both.
i work at a car parts warehouse so i can pack one mean box, also have a large section of box and packing stuff,
also for sell
-pbr brake pads front and rear
-spl clutch and rear brake lines
-300zx calipers 30mm aliuminum
i work at a car parts warehouse so i can pack one mean box, also have a large section of box and packing stuff,
also for sell
-pbr brake pads front and rear
-spl clutch and rear brake lines
-300zx calipers 30mm aliuminum
Last edited by Oriaj24; 10-21-2006 at 04:02 PM.
#6
Hey can you give me a price for these parts?
I need the
Rack & pinion
Timing chain set (tensioners and guides come with it? What about the sprockets?)
Clutch master
Wait is it DOHC or SOHC?
I need the
Rack & pinion
Timing chain set (tensioners and guides come with it? What about the sprockets?)
Clutch master
Wait is it DOHC or SOHC?
Last edited by LA_phantom_240; 10-21-2006 at 10:47 AM.
#8
sorry its a 1991 nissan 240sx DOHC
-rack 420 shipped
-timing components 60 shipped with the chain guids and tensioners. do you mean you need the idler sprocket
-clutch master 25 shipped
- 240sx brake pads 45 shipped for both front and rear
-yes their 300zx calipers got at junk yard
if you still want shifter 150
-rack 420 shipped
-timing components 60 shipped with the chain guids and tensioners. do you mean you need the idler sprocket
-clutch master 25 shipped
- 240sx brake pads 45 shipped for both front and rear
-yes their 300zx calipers got at junk yard
if you still want shifter 150
#13
i see ur parting it with basically all of ur engine bay accessories ......i am in need of a blower fan and relay so i can have heat for the winter.............please help me out if u can this is very important i may not survive the winter without one .........so please get back to me on this ........message me at tallerthenlife07@yahoo.com