TN: 240SX total part out S13 S14 SR
#1
TN: 240SX total part out S13 S14 SR
All prices are OBO, comments about them should be kept to PM’s and I will adjust them as I see fit. If paying with paypal add 3% otherwise I prefer MO
Freebies, conditions: buy something else, pay what I ask, pay shipping, and paypal fees
OBDII gas cap
Mirror switch
Emblem
Zenki tail light bulb assemblies
Bunch or SR crap off a spare block, brackets, bolts, just ask
2 sets of 97-98 fog lights
1st set 100% working order harness tab broken $70
2nd set right hand lens is cracked, both housings lack a mounting bracket $20
JDM right hand kouki headlight, broken but repaired mounting bracket includes corner light, mounting tab broken but I have both pieces and they can be glued $70
S14 kouki tails $275
JDM power folding mirrors, primer black, have been tested to work, switch has small crack $75
2x 5mm/ 1/4” 5x 114.3 wheel spacers $10
S14 SE rear sway bar stripped and sandblasted, I should have most if not all mounting hardware. $30
Subframe bushings, made of delrin-like plastic, includes all 4 $75
Apexi strut tower brace S13 or S14 $75
Rest of a S14 energy suspension kit, missing tension rod bushings and front sway bars
Cusco camber plates $100
SR redtop turbo manifold, with heat shield and new locking nuts $35
SR redtop valve cover stripped and blasted, ready to be polished or painted $90
Summit electric fan, flow is 1700-2200 cfms I believe $45
SR coil packs and harness $100
300ZX pigtail $10
New SR PCV valve $10shipped
SR oil catch can $10
SR power steering pump with bracket $40
300ZX mafs with pigtail, exhaust shop made an adapter too $110
SR A/C Bracket $15
AN -4 fitting SR turbo oil feed line $5
SR oil dipstick $10
Fidanza friction disc for SR lightened flywheel, they send 2 its my other one $15
eBay/ Home Depot boost controller $10
Big style TPS with all wires $30
New clutch fork boot $10shipped
3” high flow catalytic converter for 240SX $80
GTi-R intake manifold flange has been drilled to fit redtop head and plenum has been reversed $400
S14 SR water pump new $55
DSS Aluminum drive shaft for manual s14 w/o ABS $275
Open diffs, pick them up, they are scrap metal to me. *(middle and right)
Spare SR tranny $350
Tranny mount $30
S14 cluster surround $15
95-96 SE cluster, 230k mi (# to a company that resets odo) has not been tested $50
Front door speakers $10
Rear view mirror $10
Drivers side handle escution $5
Radio, brackets, pocket $35
S14 door sills $20
Eibach S14 Prokits on KYB AGX’s less than 10k mi $275
Eibach S14 sportlines on KYB gr-2, will sell with or without struts one front is blown, shipping will be the only added expense $80
300ZX goodridge ss brake lines, fronts: less than 3000mi of use, rears: new $70
Complete 300ZX brakes, Aluminum calipers front and rear, parking brake drum setup with skyline cables, Brembo rotors rears have never been installed, with goodridge 300zx SS brake lines $550 will seperate
Modified RB20 engine mounts for SR, CA or KA $50
5lug all 4 corners $400
S14 seats $125 will only ship freight (another $100+)
Freebies, conditions: buy something else, pay what I ask, pay shipping, and paypal fees
OBDII gas cap
Mirror switch
Emblem
Zenki tail light bulb assemblies
Bunch or SR crap off a spare block, brackets, bolts, just ask
2 sets of 97-98 fog lights
1st set 100% working order harness tab broken $70
2nd set right hand lens is cracked, both housings lack a mounting bracket $20
JDM right hand kouki headlight, broken but repaired mounting bracket includes corner light, mounting tab broken but I have both pieces and they can be glued $70
S14 kouki tails $275
JDM power folding mirrors, primer black, have been tested to work, switch has small crack $75
2x 5mm/ 1/4” 5x 114.3 wheel spacers $10
S14 SE rear sway bar stripped and sandblasted, I should have most if not all mounting hardware. $30
Subframe bushings, made of delrin-like plastic, includes all 4 $75
Apexi strut tower brace S13 or S14 $75
Rest of a S14 energy suspension kit, missing tension rod bushings and front sway bars
Cusco camber plates $100
SR redtop turbo manifold, with heat shield and new locking nuts $35
SR redtop valve cover stripped and blasted, ready to be polished or painted $90
Summit electric fan, flow is 1700-2200 cfms I believe $45
SR coil packs and harness $100
300ZX pigtail $10
New SR PCV valve $10shipped
SR oil catch can $10
SR power steering pump with bracket $40
300ZX mafs with pigtail, exhaust shop made an adapter too $110
SR A/C Bracket $15
AN -4 fitting SR turbo oil feed line $5
SR oil dipstick $10
Fidanza friction disc for SR lightened flywheel, they send 2 its my other one $15
eBay/ Home Depot boost controller $10
Big style TPS with all wires $30
New clutch fork boot $10shipped
3” high flow catalytic converter for 240SX $80
GTi-R intake manifold flange has been drilled to fit redtop head and plenum has been reversed $400
S14 SR water pump new $55
DSS Aluminum drive shaft for manual s14 w/o ABS $275
Open diffs, pick them up, they are scrap metal to me. *(middle and right)
Spare SR tranny $350
Tranny mount $30
S14 cluster surround $15
95-96 SE cluster, 230k mi (# to a company that resets odo) has not been tested $50
Front door speakers $10
Rear view mirror $10
Drivers side handle escution $5
Radio, brackets, pocket $35
S14 door sills $20
Eibach S14 Prokits on KYB AGX’s less than 10k mi $275
Eibach S14 sportlines on KYB gr-2, will sell with or without struts one front is blown, shipping will be the only added expense $80
300ZX goodridge ss brake lines, fronts: less than 3000mi of use, rears: new $70
Complete 300ZX brakes, Aluminum calipers front and rear, parking brake drum setup with skyline cables, Brembo rotors rears have never been installed, with goodridge 300zx SS brake lines $550 will seperate
Modified RB20 engine mounts for SR, CA or KA $50
5lug all 4 corners $400
S14 seats $125 will only ship freight (another $100+)
Last edited by juztinvez; 04-04-2008 at 08:36 AM.
#9
can you please take a min of your time and take a pic of your 300zx brake lines, of everything that is included and email me them.
I want to buy some for mine
ill send a pm.
thanks
i also need stock front springs and/or with shocks.
thanks
I want to buy some for mine
ill send a pm.
thanks
i also need stock front springs and/or with shocks.
thanks
#11
Very interested in 2way Kaz LSD! E-mail me at Morrison240@gmail.com! Need more info on it! Milage? Location? Shipping? E-mail ASAP
#14
still got those seats? sliders and all? please email me pics to vbgambini1@aim.com. willing to ship to miami 33162?