did some work..
09-11-2008, 05:23 PM
#1
Contributing Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Miami, FL
Posts: 2,312
did some work..
i want to finish my car asap so ill will be working on it every day when i get home from work today cleaned up engine bay took out dash and almost got the front body harness out.
now since the last owner ghetto rigged the front body harness i wanted to swap it our with my other s14 but pulling it out of my shell i ran into a snag.
the front body harness goes from the fusebox to the headlights to the drivers side fender and through the firewall that seperates to a big white screw-on plug and then to the ignition and light switch and turnsignal switch.
i didnt really try since it got dark and i just packed up for the night but can the white plug fit through the hole in the firewall? please tell me it will lol
im hoping Bigvin will help me out on this one.
also heres 2 crappy cellphone pics
now since the last owner ghetto rigged the front body harness i wanted to swap it our with my other s14 but pulling it out of my shell i ran into a snag.
the front body harness goes from the fusebox to the headlights to the drivers side fender and through the firewall that seperates to a big white screw-on plug and then to the ignition and light switch and turnsignal switch.
i didnt really try since it got dark and i just packed up for the night but can the white plug fit through the hole in the firewall? please tell me it will lol
im hoping Bigvin will help me out on this one.
also heres 2 crappy cellphone pics
09-11-2008, 06:14 PM
#2
Its good to see you work on your cars.
Take lots of pics, even if they are cell pix.
We are picture wh0res.
Seriously,
we love pictures.
or maybe I am just a visual learner!
good luck
Take lots of pics, even if they are cell pix.
We are picture wh0res.
Seriously,
we love pictures.
or maybe I am just a visual learner!
good luck
09-12-2008, 04:54 PM
#4
Contributing Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Miami, FL
Posts: 2,312
finally got the harness out today
also semi clean and painted engine bay
now engine bay with nismo mounts and SR harness
i also took out the blower motor and case and evaporator but didnt take pics
did what i could for today tomorrow gona start dissasembly of my other car and see if i have the SR in by sunday
also semi clean and painted engine bay
now engine bay with nismo mounts and SR harness
i also took out the blower motor and case and evaporator but didnt take pics
did what i could for today tomorrow gona start dissasembly of my other car and see if i have the SR in by sunday
09-14-2008, 06:07 PM
#5
Contributing Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Miami, FL
Posts: 2,312
so yea got up at 6:30 am and was still dark.... so i started to work at 7:00 am and well....got suspension and brakes on, all a/c components and clutch lines.
finished fine tuning and figuring alot of things out well sorry for the crappy pics but im proud of my self been working so hard and i now know for a fact my car will be steet worthy by next weekend.
oh almost looking like a normal engine bay when i got this shell the engine bay had nothing
weee brakes should work well with the sticky yokohamas till i get tires for my SSR's
dirty coilovers is better then no coilovers i always say... well ill clean them up later i got alot to do
and omg no way the dragon has finally left its layer this cant be... April 26, 2006-september 14, 2008 FINALLY
sexy
finished fine tuning and figuring alot of things out well sorry for the crappy pics but im proud of my self been working so hard and i now know for a fact my car will be steet worthy by next weekend.
oh almost looking like a normal engine bay when i got this shell the engine bay had nothing
weee brakes should work well with the sticky yokohamas till i get tires for my SSR's
dirty coilovers is better then no coilovers i always say... well ill clean them up later i got alot to do
and omg no way the dragon has finally left its layer this cant be... April 26, 2006-september 14, 2008 FINALLY
sexy
09-15-2008, 04:45 PM
#11
Registered User
Join Date: Mar 2008
Location: Oklahoma
Posts: 126
Man Batto im happy for you man the only thing i have left to get is an lsd for my car then ill will put all my new go fast parts on and have it tuned ^.^ cant wait to see yours done and the new way kooler then my rims on.
09-15-2008, 05:00 PM
#12
Contributing Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Miami, FL
Posts: 2,312
ty ty i know how it feels i been w/o boost for so long my car is gona feel like a ferarri lol. anyway got very little done today =( got home late from work was extremely slow at work yet my boss didnt wana let me go...
all i did today was swap the vin plate from the messed up shell dash to my perfect dash, installed new water pump from a s14 sr (it has a better flow design and fits perfectly) and finished putting in the blower motor =(
hopefully i get off early tomorrow cause i wana finish this!!! goto put the nismo tranny mount on and tighten the engine mounts plug in... everything put in my dash clean interior put in seats driveshaft get new fuel hoses.. and the list goes on and on
all i did today was swap the vin plate from the messed up shell dash to my perfect dash, installed new water pump from a s14 sr (it has a better flow design and fits perfectly) and finished putting in the blower motor =(
hopefully i get off early tomorrow cause i wana finish this!!! goto put the nismo tranny mount on and tighten the engine mounts plug in... everything put in my dash clean interior put in seats driveshaft get new fuel hoses.. and the list goes on and on
09-16-2008, 06:26 PM
#14
Contributing Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Miami, FL
Posts: 2,312
test fit the SSR in the rear looks like its gona be flush 
also test fit front SSR wheel and for some reason... it barily scrapes the paint on my caliper... so i ordered a 3mm spacer for the front i have tons of room for my coilovers
sexyness
also test fit front SSR wheel and for some reason... it barily scrapes the paint on my caliper... so i ordered a 3mm spacer for the front i have tons of room for my coilovers
sexyness