JDM ZENKI S14's 1JZ 180sx Build
28 Attachment(s)
I sold my rb20 like 3 months ago and bought this 1jz...like an idiot i did this mid season but oh well its coming together quicker than i thought...
srry for the crappy cell phone pics. Took out the dash and started removing the body harness, we are planning on deleting most of the harness to run the only the necessities.. Attachment 13740 Kill switch, push button start and my switchs were running: Attachment 13741 Still in the process of removing everything out of the engine bay: Attachment 13742 just got a set of unorthodox pulleys, they were originally on our lexus sc300 shop car: Attachment 13743 Last thing is i removed the rear sump oil pan and waiting on getting a front sump oil pan this week: Attachment 13744 Us trying to figure out how to mount the motor: Attachment 13745 Attachment 13746 Attachment 13747 Attachment 13748 we finally got it in but i wasnt to comfortable with the way the oil pan was sittin, according to Tech 2 you have to space out the sway bar so you can fit the oil pan. I said **** that and started marking the pan so i can notch it to make it fit: Attachment 13749 Attachment 13750 next up is the shifter, here is where the stock location would be on the r154 trans. Im in the process of fabbing up the shifter extension: Attachment 13751 So we took the motor back up and made a mock up oil pan and put the motor back in: Attachment 13752 And wala heres how the motor sits, we have it on 2x4's on the the mounts so we can mock up the mounts tomorrow: Attachment 13753 Attachment 13754 Attachment 13755 finally got my rukus racing mounts..cause i did not have the time nor materials to make the mounts Attachment 13756 Attachment 13757 Now that the mounts were on this is how that motor sat ( to tell u the truth it fit better than my rb) Attachment 13758 Attachment 13759 Attachment 13760 Attachment 13761 Attachment 13762 Attachment 13763 We are also using the stock ka mounts for now until my solid sr mounts come in... Attachment 13764 Removed the A/C Compressor and made a dummy pulley.. Attachment 13765 Intercooler bracket that i made and my mishimoto black fmic... Attachment 13766 Last but not least me contemplating what i want to do next hahaha Attachment 13767 NOT SHOWN IN PICTURES: - Mishimoto KA rad - Driveshaft Shop Custom One Peice Drive Shaft (On the way) - Custom Shifter Extension - Buddy Club Spec 2 (On the way) - Custom DownPipe (In the process of being made) - Tial 50mm BOV (On the Way) and there is also some misc. interior peices going in but ill label them as i get them. |
shiets weak son :laugh:
|
bring it on!!!!:sneaky:
|
ima run ya off the track. n lay the smoketown on yo asssssss :FIREdevil:
|
that is if you can keep up......:barf: KA-T hhahahahahhahahha
we will see what happens next season |
u dont wanna c me next season sucka :pimpflash:
i wont be able to see you thro my smoke for sure :lol: |
we will see
|
car looks good, good luck with it
|
Keep us updated and with a lot of pics.:bigok:
|
neato
def keep us updates |
oohh this looks fun to watch..
|
very nice. 1j ftw
|
you make me contemplate this swap instead of an rb. please dont skimp on details or problems and solutions.
|
2 Attachment(s)
|
4 Attachment(s)
Mishimoto Intercooler
Attachment 13636 Mishimoto Rad Attachment 13637 I wonder were the valve covers went (Maybe Powdercoating?) Attachment 13638 Greddy Oil Catch Can Attachment 13639 |
All times are GMT -7. The time now is 06:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands