MY 240sx
Thread Starter
Registered User
Joined: Jul 2003
Posts: 267
From: Brantford, Ontario, Canada
thanks man yes a coupe and the offset is 20mm all tires with longer studs, the rim is an Eagle Alloy 17" x 7 running 225.45.17
the seats are called R1 racing seats see pic.
the seats are called R1 racing seats see pic.
Last edited by Doba's240; Jul 21, 2003 at 04:17 AM.
Registered User
Joined: Mar 2003
Posts: 183
From: south bay, california
sorry...man...i'm not too familier with millimeters...+40? maybe...
are you using any spacers?...
and how much those seats costs you?
did you you have to customize the brackets?
too much Q's...sorry...
are you using any spacers?...
and how much those seats costs you?
did you you have to customize the brackets?
too much Q's...sorry...
Thread Starter
Registered User
Joined: Jul 2003
Posts: 267
From: Brantford, Ontario, Canada
Originally posted by nissean
sorry...man...i'm not too familier with millimeters...+40? maybe...
are you using any spacers?...
and how much those seats costs you?
did you you have to customize the brackets?
too much Q's...sorry...
sorry...man...i'm not too familier with millimeters...+40? maybe...
are you using any spacers?...
and how much those seats costs you?
did you you have to customize the brackets?
too much Q's...sorry...
The seats cost me $700 (CDN) about $400 (US) for the two of them. i found them on ebay, you can try by typing in R1 racing seats, maybe they still have them
Yes i had to make custom brackets, i had some perfect slices of aluminum laying around in my garage, i cut them and bent them into shape, drilled some holes in the right position for the sliders and pooof fit like a glove.
My drivers seat sits up a little bit cause the '92 coupe has a bump on the floor, so i had to go over that, the passengers seat sits right low to the ground, but because of the bump the seat doesnt slide up, I have to fix that still.
Contributing Member
Joined: Mar 2003
Posts: 10,109
From: Pasadena,ca
Originally posted by Doba's240
yeah sorry thats what i meant, The rim is a front wheel drive rim +40 offset and im using 20mm spacers to bring them out (about an inch)
The seats cost me $700 (CDN) about $400 (US) for the two of them. i found them on ebay, you can try by typing in R1 racing seats, maybe they still have them
Yes i had to make custom brackets, i had some perfect slices of aluminum laying around in my garage, i cut them and bent them into shape, drilled some holes in the right position for the sliders and pooof fit like a glove.
My drivers seat sits up a little bit cause the '92 coupe has a bump on the floor, so i had to go over that, the passengers seat sits right low to the ground, but because of the bump the seat doesnt slide up, I have to fix that still.
yeah sorry thats what i meant, The rim is a front wheel drive rim +40 offset and im using 20mm spacers to bring them out (about an inch)
The seats cost me $700 (CDN) about $400 (US) for the two of them. i found them on ebay, you can try by typing in R1 racing seats, maybe they still have them
Yes i had to make custom brackets, i had some perfect slices of aluminum laying around in my garage, i cut them and bent them into shape, drilled some holes in the right position for the sliders and pooof fit like a glove.
My drivers seat sits up a little bit cause the '92 coupe has a bump on the floor, so i had to go over that, the passengers seat sits right low to the ground, but because of the bump the seat doesnt slide up, I have to fix that still.
Thread Starter
Registered User
Joined: Jul 2003
Posts: 267
From: Brantford, Ontario, Canada
Originally posted by badman70_1
What kind of springs did you use to lower your S13? I was gonna do mine with Eibach Sportlines.
What kind of springs did you use to lower your S13? I was gonna do mine with Eibach Sportlines.
