tennessee members?
Registered User
Joined: Mar 2005
Posts: 200
From: Greeneville Tn.
i think im going to get away from the 240 thing and buy a 98 trans am. after everything is done with the insuranse company, i am going to sale the car with everything with it. i wanted to see if any of the locals wanted it first, because the car will need a flat bed. some of the things included are, the car, engine with p&p new head crower rods, cp forged pistons bored out to 89.5, cometic head gasket, arp head bolts, new timing kit, new vacuum lines, new oil pump. engine has about 2000 miles on it with a 9.0 compression ratio, all engine parts balanced, ready for a turbo. msd ignition system, blaster coil, nology hot wires, 35-50-75 wet nx nitrous kit with digital rpm cut on and cut off., and also set up at the pedal(have it every gear) also has heater pad, and purge.i just put on a clutch master 6 puck clutch, fidnanza flywheel, obx header, racing pulley, cold air intake, dnx exhaust, high flow cat(catco), venom injectors, venom 400 module, 19 inch rims and tires, 2in lowering springs, side skirts, and back skirts, clear black tail lights, 4 drilled and slotted rotors with brand new performance pads, upper front and back strut bars, walbro 255 fuel pump, dual pod. and also things i never got to put on and are brand new are--------------------- the turbo system hybrid t3/t4 t04e turbo, 38mm wastgate, bov, turbo manifold, intercooler piping and fittings, down pipe flange, oil line kit, safc2, 300zx maf, engine damper/stabilizer. the car is totaled, this set up would push you to about 450hp, you would still need the intercooler, and bigger injectors. and you should get a few gauges, and a boost controler. i have these things but i am returning them for a full refund. am looking for $4000 dollars firm. i have about $6000 in the engine. i have all the receipts totaling $12000 including the engine parts and work. i dont know how long my suit is going to take, but i will be able to sale it all after its over. im not parting anything out. is anyone interested?
Last edited by nick3; Jan 1, 2006 at 07:07 PM.
Registered User
Joined: Nov 2005
Posts: 12
From: Jackson , TN
Hey whats up people ,im new to the forum, saw your thread here about TN people and getting a meet up thats sounds like it would be a blast. I have a 95' (240 of course) we put the black top in it its almost ready to drive if i can work the kinks out. But yeah whenever yall get that meet going let me know something cause there are like 4 or 5 of us 240 boyz down here in Jackson. I think i speak for all of us when i say we would definatley make it ~~~Later
Registered User
Joined: Jan 2006
Posts: 22
From: Nashville
hey, new to the forum and really need some help with my 90 240SX hatch. bought it in non running condition with a DE already swapped in. was not wired and all the threads say is to search for how to wire it up. i really need some help with this and dont want to give up on this car.
Any help is greatly appreciated
Any help is greatly appreciated
Registered User
Joined: Jan 2006
Posts: 22
From: Nashville
motor has no PS and no AC, i have the dash, body and engine harness as well as the ecu from the 95. none of the posts that i have found have been very exact as to what i need to do wiring wise, so any help would be greatly appreciated
My AIM is ThirdWorldCSTMS, and email is fuzion_mech5@yahoo.com so you can either post back here, IM me or email me. any one of the three. Thanks guys, i really appreciate any help you can give me.
My AIM is ThirdWorldCSTMS, and email is fuzion_mech5@yahoo.com so you can either post back here, IM me or email me. any one of the three. Thanks guys, i really appreciate any help you can give me.
Last edited by TWCDrift; Jan 29, 2006 at 05:28 PM.
