Well I purchased the complete set with my coilovers but I really dont want to replace the bushings my self. Would any one know of a shop that would replace them. I have searched but no luck. I live in Los Angeles.

 

Did you get them from a shop or got them used? Since your in Import Tuning heaven AKA Los Angeles, call up the shops lie SP Engineering or Spark, Those guys are pretty cool. The guys at Spark built my friends T88 turboed 2JZ powered GS300.

For the most part, most of the shops will be able to point you in the right direction.

 

No I didn't get them from a shop. I bought them new online at 240sxmotoring.com My problem is that I don't know any import tuning shops. Thanks for the info I'll look up those shops. I'll be sure to look up Spark I have a friend who what's to put a 2JZ in his sc300.

 

Their the experts in the 2JZ platform, they'll get things done for him, but a bit on the pricey side...

 

Try a local alignment shop

 

The bushings are a big job, so an alignment shop probably wont cut it. BTW, this really a regional question. May do better in that section

 

shouldnt alignment shops be able to do it? you'd figure they have to inspect the car before alignment and fix what ever is wrong with the suspension. which can be anything from wheel bearings, ball joints, bushings, etc. ionno just sounds crazy to me. id try asking tho. expect to not have your car for atleast a week. i changed mine myself with access to a local community college auto shop. good learning experience.