Drivetrain AT/MT Drivetrain discussions on the 240sx and Silvia

welded diffs

Old Mar 5, 2007 | 04:05 AM
  #1  
prodigys14's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 4
welded diffs

just wondering if welded diffs were bad for the trans and rear axle coz a friend of mines told me it would rip the trans apart and my other friend told me the worst that can happen is wear the tires out faster... idk whose rite so i was wondering if anyone here would know... thanks
Old Mar 5, 2007 | 11:03 AM
  #2  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
your friend must not work on cars alot or own a car with a welded diff. also he seems to read to much...


ill get to the point

1. don't get the diff welded if you are not going to enter drift comps or drift the car weekly

2. tires will wear

3 chirping will happen at low speeds

4. I welded my diff and only failed becuase i used a crappy flux welder. get it mig welded

Last edited by Biggamehit; Mar 20, 2007 at 06:02 PM.
Old Mar 5, 2007 | 11:35 PM
  #3  
prodigys14's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 4
ic thanks but is it safe if it was in a auto trans?
Old Mar 6, 2007 | 03:11 AM
  #4  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
hmmmmmmmmmmmmm now that... i don't know. i cant comment on that. i have not driven an auto 240 before. I know auto trannies are suppose to be even stronger, but bro for fun factors and alot of other reasons such as total control you need to gather about 300 to 400 dollars worth of junkyard parts and convert to manual bro.
Old Mar 19, 2007 | 06:08 PM
  #5  
OutToWinPAHC's Avatar
Registered User
 
Joined: Jan 2006
Posts: 198
From: Philadelphia PA
Mig weld a diff I would give that a big no. Mig is ok for body panels and your exhaust, I would want something a bit stronger on the drive train.
Old Mar 20, 2007 | 02:09 AM
  #6  
Clearalbino's Avatar
Registered User
 
Joined: Apr 2005
Posts: 97
From: AZ
yeah, i agree. I had mines mig welded a couple of times because its what we use around the shop and it consistantly kept breaking the welds.
Old Mar 20, 2007 | 02:55 PM
  #7  
Biggamehit's Avatar
Contributing Member
iTrader: (2)
 
Joined: Aug 2004
Posts: 5,091
From: Misawa, Japan
brothers. i have buddies who have driven in comps on mig welders.. and have had the diff for over 2 years... you cant just open it up and weld away.

first you must dry the gears ( break cleaner) and grind gears down if you can

second you must heat the gears with torch ( the metal is heat treated and will not bond properly if cold.)

last you must weld at least 8 points ( and weld it to the carrier) to make this diff solid. and then you drift on bro.

Migs are not Flux welders and are strong you need over 220Volts
Old Mar 20, 2007 | 03:31 PM
  #8  
RuizXIII's Avatar
Contributing Member
iTrader: (2)
 
Joined: May 2005
Posts: 2,653
From: New Jersey!
my man Zenkislider here on the forums has a welded Diff.
he knows the 4-1-1, since its done on his D/D
but yeah it gets the job done.
Old Mar 20, 2007 | 04:02 PM
  #9  
Ayuaddict's Avatar
Contributing Member
 
Joined: May 2005
Posts: 3,096
From: San Jose, CA
several of my friends have welded diffs and they run fine at events, comps and daily. im planning on welding both of my diffs (cressida and 240) soon.
Old Mar 20, 2007 | 04:05 PM
  #10  
MS!3's Avatar
Contributing Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 2,069
From: USA
Originally Posted by RuizXIII
my man Zenkislider here on the forums has a welded Diff.
he knows the 4-1-1, since its done on his D/D
but yeah it gets the job done.
haha jordan wishes he had a welded......again
Old Mar 20, 2007 | 04:59 PM
  #11  
RuizXIII's Avatar
Contributing Member
iTrader: (2)
 
Joined: May 2005
Posts: 2,653
From: New Jersey!
^Man, Jordan keeps effing up!
Old Mar 20, 2007 | 06:37 PM
  #12  
MS!3's Avatar
Contributing Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 2,069
From: USA
haha talk about a "locd" diff

Last edited by MS!3; Mar 20, 2007 at 06:55 PM.
Old Mar 20, 2007 | 09:19 PM
  #13  
zenkislider's Avatar
Contributing Member
 
Joined: Feb 2006
Posts: 1,580
From: Bossier,LA
Originally Posted by 1993Coupe
haha talk about a "locd" diff
jared (aka cant even install a CD player guy) u always go something shi**y to say about me. lol your jealous because i got to expeiance coilovers, welded, good autoX times and everything else BEFORE you!

i had welded, i daily drove welded and drifted welded...meh! shut up jared! lol
Old Mar 20, 2007 | 09:24 PM
  #14  
MS!3's Avatar
Contributing Member
iTrader: (1)
 
Joined: Apr 2006
Posts: 2,069
From: USA
haha, one day i will experience the coils! but not a locd diff, lol j/p

i wanna see you hook up a stereo jordan! lol, my car is possesed or something, i doesnt want to play music.

Last edited by MS!3; Mar 20, 2007 at 09:29 PM.
Old Mar 20, 2007 | 09:32 PM
  #15  
zenkislider's Avatar
Contributing Member
 
Joined: Feb 2006
Posts: 1,580
From: Bossier,LA
rofl. idk what wrong with your s13. probally just the obvious...its an s13!!! OOooOo no j/p. just return the stereo and stick to the ipod ear buds lol, at least they work.

Thread Tools
Search this Thread

All times are GMT -7. The time now is 10:13 PM.