Im curiois if any1 would know whats wrong with my highbeams

my left highbeam went out. I checked the bulb and it was good. What i did is do a current test to see if the wire had power running through it to the lights, but nothing. Is it the plug harness or maybe a loose calbe or a fuse?

Right now i have a wire running from the highbeam on the rightside powering both highbeams...

edit** my fuses are fine

 

step one buy new bulb or swap from other side
step two come back and tell us whats up

 

still nothing. i swappe them and it is still out

 

s13 of s14
if i rember right in the s14 theres a sub harness that goes the the high to low light check that out

 

alright. ill try that out when theres some sun out

 

My right high goes out and occasionally if i flash them, both are out. it has had this problem for years.

 

... I'm in the same boat! I noticed in early spring that my RHS high beam quit. The low beam was still good, so of course, I replaced the bulb and still no high beams! I kinda forgot about since I rarely use them, but now, days are getting shorter....

I haven't done any trouble shooting yet, but I wouldn't be surprised if we had the exact same problem.

Thanks for reminding me!

 

i had both of mine go out at the same time. but mine was easy, replaced bulbs


check the fuse box - you said the fuse was fine but check to see if there is power going to the fuse. remove the fuse turn on the lights and put a volt meter in the fuse hole.

 

my dad said it was a problem with the "pigtails" for the lights. dunno what that means.

 

I had this problem. It's common. You need a new switch.

 

Switch? What switch?....

 

s13 dont have high beams...

 

what?

 

yeah they do

 

The only switch in the entire circuit. You know, the one mounted to the steering column, you physically grab with your hand and twist and push to operate?