Website Updated - Rollbar / Harnesses / Undercoating / Sus / Tires
08-25-2003, 07:37 PM
#1
Contributing Member
Thread Starter
Join Date: Sep 2002
Location: Massachusetts
Posts: 680
Website Updated - Rollbar / Harnesses / Undercoating / Sus / Tires
I just finished dumping a lot of pics I had gathered into my website. Pics span a few projects and a few months andx may lack organization. Let me know it you find any bad links and/or typos.
http://www.saltgod.org/1991240sx/1991240sx.html
Some previews:
Thanks,
-Justin
http://www.saltgod.org/1991240sx/1991240sx.html
Some previews:
Thanks,
-Justin
08-25-2003, 10:12 PM
#3
Registered User
Join Date: Jun 2003
Location: Harrisburg, PA
Posts: 8,440
Great site
I'm a newb to the lower control arm thing, but was wondering what tool do you need to seperate the ball joints from the spindles. Any help would be appreciated because I'm gonna try and put a lower control arm on my car
I'm a newb to the lower control arm thing, but was wondering what tool do you need to seperate the ball joints from the spindles. Any help would be appreciated because I'm gonna try and put a lower control arm on my car
08-26-2003, 10:13 AM
#5
Registered User
Join Date: Jun 2003
Location: Harrisburg, PA
Posts: 8,440
Originally posted by Justin.b
I bought that silly tool from JC Whitney that snapped after one try. I then used the old standby - a pickle fork and a 16 pound sledgehammer.
-Justin
I bought that silly tool from JC Whitney that snapped after one try. I then used the old standby - a pickle fork and a 16 pound sledgehammer.
-Justin
Thread
Thread Starter
Forum
Replies
Last Post