battosaii930

iTrader: (2)

here i found this this write up and i thought i should share it with you guys i thought it was cool. it shows you how to make a JDM s14 cluster read in MPH so you have a 180mph cluster!

http://forums.freshalloy.com/showthread.php?t=124389

Biggamehit

iTrader: (2)

its cool but we kinda wanna keep the how two section in house... there has been plagiarizing going around thats the reason.

battosaii930

iTrader: (2)

hmm i c, this guy seems legit but i didnt want to copy any paste so i thought the link would be appropriate

battosaii930

iTrader: (2)

also i wonder how you unsolder that one connector. im a noob a soldering, do you heat up the solder with the gun and and kinda pass a small flat head screwdriver through the solder to unsolder the connection?

ryguy

iTrader: (1)

When you heat up the solder the wires will just pull apart.

Biggamehit

iTrader: (2)

yeaup you will need a desodering gun to suck up the flux... oh yea lol i was not suggesting copy and paste lol.... i just didn't wanna start a trend of importing how to's from other sites.. but no big problem bro.. this is a good one.

battosaii930

iTrader: (2)

cool but i didnt mean a soldered wire i mean the connection like how it is in the link

Biggamehit

iTrader: (2)

you heat the solder and you need the flux gun to suck up the heated solder.. you don't wanna scrap anything across the board. you will end up bridging something and frying it out.

shrimpscampi

Thanks for posting the link...