NA Motor Discussions regarding N/A KA24E, KA24DE, and SR20DE

Horsepower

Thread Tools
 
Search this Thread
 
Old Feb 21, 2006 | 02:14 PM
  #1  
93coupe's Avatar
Thread Starter
Registered User
 
Joined: Feb 2006
Posts: 50
From: Hastings,MN
Question Horsepower

I was wondering on how to get the most horsepower out of my ka without putting a turbo into it and spending less that two grand, i just bought and put on the hks hi-power exhaust, my friend put one of those quest superchargers on his he likes but i think its kind of stupid but if I could any tips that would be great.
Old Feb 21, 2006 | 02:48 PM
  #2  
silviasichigo's Avatar
Registered User
 
Joined: Oct 2005
Posts: 339
From: ‰«“ꈺ–k’J
BigVinnie should chime in he is well on his way to a high horsepower KA, I would do it this way but I can afford it.

This is what I am doing to the S15 SRDE (Little Different)
Forged Pistons, Con-rods, Double vavle springs, 316 cams, port, polished head, portmatched intake manifold/exhaust manifold, 1.0mm head gasket, ported and polished oil pump (Increase flow) Lightned Fly wheel, I will run 77mm exhaust all the way back most of the stuff is already here the rest is ordered. I will hopefully have the car together for the guy by the end of the month.
Old Feb 21, 2006 | 05:15 PM
  #3  
BADA$$240's Avatar
Registered User
 
Joined: Feb 2006
Posts: 124
From: Texas
what kind of hp range you expecting to get silviasichigo?
Old Feb 21, 2006 | 05:29 PM
  #4  
motegineon's Avatar
Contributing Member
 
Joined: Feb 2005
Posts: 2,586
From: 神奈川県,日本
intake, headers, exhaust, lightweight pulleys, cams, eliminate clutch fan, and a nice tune
Old Feb 21, 2006 | 06:02 PM
  #5  
Cape 240's Avatar
Contributing Member
 
Joined: Jun 2005
Posts: 652
From: Cape Cod, Ma.
SEARCH around, there are tons of posts on this forum on how to make power for cheap on an N/A KA.

IBTL
Old Feb 21, 2006 | 06:13 PM
  #6  
silviasichigo's Avatar
Registered User
 
Joined: Oct 2005
Posts: 339
From: ‰«“ꈺ–k’J
Hmmm I never thougt about it I would say 250~ he is putting it into a 1988 S13 completely gutted and currently doing the suspension and body reenforcment, I have never actually built an N/A to achieve a HP goal just did it to get it running again. Engine managment will be Motech with MSD ignition trying to keep the wiring down to a minumum it will be a gymkana monster (japanese auto cross for thoes that don't know)
Old Feb 21, 2006 | 11:30 PM
  #7  
mys13rocks's Avatar
Registered User
 
Joined: Mar 2004
Posts: 228
From: 714 california WEsTMinSter
DUDE lol i know how u can get hp.
u want turbo u get 500 hp full built or
u want na u can get 250hp fully built
na
do this buy high comp pistons 11-1or 10-1
get h beam rods, balance the crank and knife edge it, buy 11 lb fly wheel[fidanza]
,build the head , ferrea valvesand retainers, comp cam lvl.3 [idle around 2grand],port match intake and exhaust, MSD 6AL,super afc apexi. and some 105 octain should do it.
gona be load as shiet but yea u want power u get what u pay.[its gona be godly load]or give speedomotive a call.
Old Feb 22, 2006 | 01:42 AM
  #8  
silviasichigo's Avatar
Registered User
 
Joined: Oct 2005
Posts: 339
From: ‰«“ꈺ–k’J
Originally posted by mys13rocks
DUDE lol i know how u can get hp.
u want turbo u get 500 hp full built or
u want na u can get 250hp fully built
na
do this buy high comp pistons 11-1or 10-1
get h beam rods, balance the crank and knife edge it, buy 11 lb fly wheel[fidanza]
,build the head , ferrea valvesand retainers, comp cam lvl.3 [idle around 2grand],port match intake and exhaust, MSD 6AL,super afc apexi. and some 105 octain should do it.
gona be load as shiet but yea u want power u get what u pay.[its gona be godly load]or give speedomotive a call.

Old Feb 23, 2006 | 12:32 AM
  #9  
CircuitRacer's Avatar
Registered User
 
Joined: Jan 2005
Posts: 13
From: West Covina
Originally posted by mys13rocks
DUDE lol i know how u can get hp.
u want turbo u get 500 hp full built or
u want na u can get 250hp fully built
na
do this buy high comp pistons 11-1or 10-1
get h beam rods, balance the crank and knife edge it, buy 11 lb fly wheel[fidanza]
,build the head , ferrea valvesand retainers, comp cam lvl.3 [idle around 2grand],port match intake and exhaust, MSD 6AL,super afc apexi. and some 105 octain should do it.
gona be load as shiet but yea u want power u get what u pay.[its gona be godly load]or give speedomotive a call.
Haha I used to work there so I know how they operate but I'm not gonna say anything here
Old Feb 23, 2006 | 08:23 AM
  #10  
Flip_240Sex's Avatar
Registered User
 
Joined: Jan 2006
Posts: 23
From: Palmdale,California
Intake, Headers, and exhaust won't give you a big boost in power. It just 'frees' up lost hp.

I put in an AEM SRI, Hotshot headers, and a HKS exhaust and I didn't get alot of power, but I did 'feel' the difference.

The total cost was maybe a little below a grand for me, but there are alot of free, DIY mods you can do to your car. Just look up the post that Bigvinnie made about, "Why NA you ask?".

Just my $.02
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jester'z 240
Off-Topic
13
Feb 15, 2005 05:29 AM
DriftS14
NA Motor
6
Apr 7, 2004 10:00 PM
TORONTO240sx
General
6
Mar 9, 2004 03:14 PM
elks240
Turbo Motor
4
Mar 6, 2004 05:09 PM
raiden571
Engine Swaps
1
Jul 21, 2003 09:09 PM




All times are GMT -7. The time now is 04:58 AM.