$lacker

Made by Trust/Greddy, it's a huge 06H-25G turbo (I believe they're also known as the T67?) and is often used on sr20dets
4" inlet, oil cooled, supposed to support up to 6-700hp, and needs to be externally gated
I bought 2 that were briefly used in a 1200hp twin turbo Supra application, and I only need one for myself, so the other is up for sale
Just before I bought them, the turbos were inspected by Greddy and are in beautiful shape. No play whatsoever in the shaft, spins perfectly, there's a ~90 degree elbow welded onto the compressor side, and a threaded hole for an EGT probe on the exhaust side
Asking for $1250 Canadian (OBO/neg), or open to full/partial trades. I'm looking for a Haltech or a big external wastegate, among other things.
Email me at pettipas AT hotmail DOT com and use a subject heading I won't mistake for junk mail
Thanks

Copy and paste the links to make them work
Bottom left one (stock DSM 14b on the right, note the size difference): http://ot.webrats.com/100_0311.JPG
Here's the intake side-turbo is slightly oily from being stored, but in impecable shape overall: http://ot.webrats.com/100_0312.JPG
Exhaust side: http://ot.webrats.com/100_0313.JPG

Here are some specs for the turbo I found online (http://www.alltrac.net/tuning/turbo.html):
Comp. Inducer- 2.381" (Compare to a 20g's 2.071" or a TO4E 57Trim's 2.23")
Comp. Exducer- 3.070" (Compare to a 20g's 2.677" or a TO4E 57Trim's 2.95")
Turbine Minor- 2.130" (Same as an 06H-20g)
Turbine Major- 2.402" (Same as an 06H-20g)