FS: Turbo kit KA24
Thread Starter
Registered User
Joined: Jul 2005
Posts: 10
FS: Turbo kit KA24
I’m selling this since I got no motor and I’m most likely be doing a different project in the future
XSpower .42/.48 T3 ball bearing turbo
External Wastegate w/ 6 and 8lb springs
Removable Blow Off Valve
Customized Aluminum 2.5" piping
OBX 8:1 Fuel Management Unit
Downpipe + Turbo fittings etc
I took out a loan for this turbo and now my turbo kit is sitting here collecting dust which it shouldn't. It should be powering a 240 that's killing some American cars. But anyways I still got to find a motor and get pistons, connecting rods (forged by the way), bearings etc, plus machine work. It’s going to be too much. So this kit would be good for a person who just wants to get a turbo kit quick and slap it on. Or has a motor built. Whatever it is I’m selling and am moving to a different project with my 240. Well here is the description of when I bought. It came with homemade SOHC manifold but then I sold it on eBay since I was moving on to DOHC of the ka24 series motor. You’re thinking how much I’m asking for? Well whatever the best offer I get gets it. I'll throw in a rear differential gasket that I was going to replace for my 89 240 since it was leaking, for free. I have no clue how to take the rear differental off.
Here is the description of what it said when I bought it.
Here is a used turbo kit off of a 89 240sx SOHC (ka24E). If your looking for a kit that spools hard and fast then this is what you are looking at. This kit has a T3 oil cooled ball bearing turbo, external wastegate with 6 and 8lb springs, Aluminum 2.5" piping all cut to fit any s13 style 240sx (89-94) with hand welded removable BOV (rediculously loud!!!!) And all the couplers that you would need. And the massive 31" by 12" polished aluminum intercooler!!!!! It also includes a 8:1 Fuel Managment Unit (FMU). Turbo has the function 7 inlet/outlets, and has minimal shaft play if any at all. Comes with the downpipe and wastegate tube that i was using, but they need some welding finished because we ran out of argon.
This kit can also be used on sohc (ka24e) or dohc (ka24de) 240sx with a different manifold.
XS T3 ball bearing turbo
Wastegate w/6 and 8lb springs
BOV and all the aluminum piping custom fit for the 89-94 240sx w massive intercooler
8:1 FMU, downpipe, wastegate tube, turbo fittings, and misc. hoses and tubes, etc.
XSpower .42/.48 T3 ball bearing turbo
External Wastegate w/ 6 and 8lb springs
Removable Blow Off Valve
Customized Aluminum 2.5" piping
OBX 8:1 Fuel Management Unit
Downpipe + Turbo fittings etc
I took out a loan for this turbo and now my turbo kit is sitting here collecting dust which it shouldn't. It should be powering a 240 that's killing some American cars. But anyways I still got to find a motor and get pistons, connecting rods (forged by the way), bearings etc, plus machine work. It’s going to be too much. So this kit would be good for a person who just wants to get a turbo kit quick and slap it on. Or has a motor built. Whatever it is I’m selling and am moving to a different project with my 240. Well here is the description of when I bought. It came with homemade SOHC manifold but then I sold it on eBay since I was moving on to DOHC of the ka24 series motor. You’re thinking how much I’m asking for? Well whatever the best offer I get gets it. I'll throw in a rear differential gasket that I was going to replace for my 89 240 since it was leaking, for free. I have no clue how to take the rear differental off.
Here is the description of what it said when I bought it.
Here is a used turbo kit off of a 89 240sx SOHC (ka24E). If your looking for a kit that spools hard and fast then this is what you are looking at. This kit has a T3 oil cooled ball bearing turbo, external wastegate with 6 and 8lb springs, Aluminum 2.5" piping all cut to fit any s13 style 240sx (89-94) with hand welded removable BOV (rediculously loud!!!!) And all the couplers that you would need. And the massive 31" by 12" polished aluminum intercooler!!!!! It also includes a 8:1 Fuel Managment Unit (FMU). Turbo has the function 7 inlet/outlets, and has minimal shaft play if any at all. Comes with the downpipe and wastegate tube that i was using, but they need some welding finished because we ran out of argon.
This kit can also be used on sohc (ka24e) or dohc (ka24de) 240sx with a different manifold.
XS T3 ball bearing turbo
Wastegate w/6 and 8lb springs
BOV and all the aluminum piping custom fit for the 89-94 240sx w massive intercooler
8:1 FMU, downpipe, wastegate tube, turbo fittings, and misc. hoses and tubes, etc.
Thread
Thread Starter
Forum
Replies
Last Post
WhoDiddy
Turbo Motor
10
Feb 2, 2006 07:45 PM
nissmo240sx
Private For Sale / Wanted
1
Dec 10, 2002 08:31 PM