Finally got her!
07-17-2003, 11:01 AM
#32
Contributing Member
Thread Starter
Join Date: Mar 2003
Location: Pasadena,ca
Posts: 10,109
Originally posted by Sil40_Mayhem
nice ride, 'JynX. hey, when you do that swap (and take pictures), don't forget about writing up that 'howto' guide for us mechanically challenged types!
nice ride, 'JynX. hey, when you do that swap (and take pictures), don't forget about writing up that 'howto' guide for us mechanically challenged types!
Cus im not that great on explaning things.
07-23-2003, 02:21 AM
#36
Registered User
Join Date: Jan 2003
Location: Oregon
Posts: 264
Hey, if you need any help with your swap feel free to IM me at NISMOButtnutz, or Email me at Nismo241@comcast.net I did a wiring write up for the RB20, and I can help through any other random BS you encounter.
07-23-2003, 10:49 AM
#37
Contributing Member
Thread Starter
Join Date: Mar 2003
Location: Pasadena,ca
Posts: 10,109
Originally posted by Nismo241
Hey, if you need any help with your swap feel free to IM me at NISMOButtnutz, or Email me at Nismo241@comcast.net I did a wiring write up for the RB20, and I can help through any other random BS you encounter.
Hey, if you need any help with your swap feel free to IM me at NISMOButtnutz, or Email me at Nismo241@comcast.net I did a wiring write up for the RB20, and I can help through any other random BS you encounter.
07-24-2003, 03:50 PM
#38
Contributing Member
Thread Starter
Join Date: Mar 2003
Location: Pasadena,ca
Posts: 10,109
well today we took apart the KA, took out the stock exahust. We were ganna lift the engine out..but we kouldnt get a hold of a cherry picker...and i wasnt bout to go buy one kus we are struggling guys
So hopefully soon it will be out and i can clean the engine bay a bit. I got a few parts if any one wants to buy em from me.
So hopefully soon it will be out and i can clean the engine bay a bit. I got a few parts if any one wants to buy em from me.
08-07-2003, 08:22 PM
#41
Contributing Member
Thread Starter
Join Date: Mar 2003
Location: Pasadena,ca
Posts: 10,109
Ganna stick with the stock steering coloumn..im ganna have to shave a lil off the turbo houseing. Today we to0k out the KA, the KA harness and the dash is off. Took out the RB and started with the wiring. Tomorrow we will finish the wiring and in a few days Do the auto -> manual conversion..and drop the RB and hook it up. My digi cam isnt acting right so i couldnt take any pics. This swap is a lot easier then i thought! Im ganna be needing a New driveshaft i think
Thread
Thread Starter
Forum
Replies
Last Post