i have a 95 240sx and i was wondering how to lean my headlight lens from the inside. i know hwo to take them out but i dont know where to take a part the lens. i searches some topics but i didnt read any on how to take apart the lens. sry

 

You will have to heat them up (heat gun, oven) to soften the sealant and then you should be able to take the lense off.

 

the headlights have little metal brackets should i take them off? the heat the them up? thanks

 

^ thats ****ing commen sense.

 

take the clips off then stick em in the oven, work on em, then before closing them up put them back in the oven heat em up, take em out and put the clips back on

 

what exactly is "leaning the lense"

you mean aiming? there are adjustment aparati on the back of the housing. 8mm socket

now if you want to remove the lense 250 degrees cover lense with foil and do for around 10 mins. use a butter knife to break the seal and you should be able to pull it off with your hands

 

I think he meant clean instead of lean

 

-_- if u want them clean use Mother's Aluminum Polish, wipes the cornbread look right off the lense but seriously...topic has been covered numerous times...