recommended parts

Old May 25, 2009 | 02:28 PM
  #1  
MTLS13's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 16
From: Montreal
recommended parts

hey guys i was just wondering i wanna bring my sr up to 300-350hp (for now) and i was wondering what are some simple mods im not talkin about changing turbo or wtv.. just to bring up the HP and torque of the stock motor?

thanks
Old May 25, 2009 | 03:28 PM
  #2  
shaban's Avatar
Contributing Member
 
Joined: May 2007
Posts: 1,188
From: virginia
FMIC
Full 3" Exhaust
Boost Controller - 14psi
Old May 25, 2009 | 07:46 PM
  #3  
ug-t's Avatar
Registered User
 
Joined: Mar 2009
Posts: 36
From: Florida
Originally Posted by shaban
FMIC
Full 3" Exhaust
Boost Controller - 14psi
with this it output should be about 220-230 whp.... think you will have to upgrade to at least the t28 injectors and a rom tune to hit 300hp...
Old May 25, 2009 | 08:14 PM
  #4  
battosaii930's Avatar
Contributing Member
iTrader: (2)
 
Joined: Jun 2006
Posts: 2,312
From: Miami, FL
cant hit 300 with stock turbo.

you need injectors, turbo, z32 maf and a tune atleast
Old May 25, 2009 | 08:42 PM
  #5  
shaban's Avatar
Contributing Member
 
Joined: May 2007
Posts: 1,188
From: virginia
I'd recommend
GT2871R
550cc injectors
SAFC (atleast) for tuning
Z32 MAF

But if you do decide to upgrade the turbo, you will have to get the exhaust and fmic.
Old May 25, 2009 | 10:21 PM
  #6  
MTLS13's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 16
From: Montreal
thanks my main plan was fmic.. z32 maf... the exhaust i have is already 3' but if i do bring my turbo to 10-12 psi would i have to do anything so the motor doesnt fck up on me?
Old May 26, 2009 | 01:16 AM
  #7  
shaban's Avatar
Contributing Member
 
Joined: May 2007
Posts: 1,188
From: virginia
10-12 pounds is fine, I run 18. It's just the turbo's efficiency that you will have to worry about. After 14psi, it's pretty much a heater and will soon detonate. You still won't be at 300horses with just those upgrades though. If you want to reach that level, you will either have to build internals, or upgrade your turbo. The SR20 motor is good up to 400hp on the stock block (no internal modifications), so you will not have to worry about the motor messing up. As long as you're not redlining whenever you can, and pushing it all the time, the motor will last you a long time.

By the way, once you start building, you will never think it's enough. Set a goal for yourself and once you reach that level, enjoy it, don't bother trying to build the fastest car around, because that will only bring you trouble. You also have to remember - with each new modification, new problems will appear. So be prepared to spend a little more than you were expecting, always have back-up money left over so you don't have to keep the car down long when something does go wrong.
Old May 26, 2009 | 01:15 PM
  #8  
MTLS13's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 16
From: Montreal
[QUOTE=shaban;386939]By the way, once you start building, you will never think it's enoughQUOTE]

i know what you mean.. but i have my limitations for this year lol..

eventually if i can keep the car long enough i would like to swap different motors just to mes around

but my real reason is that.. i used to have the fastest car among my friends then it all went to ****

my brother got a twin turbo 300zx my friend got a skyline r33 gt-r another friend has a 1jz supra and now im at the back of the line...
Old Jun 2, 2009 | 01:39 AM
  #9  
MTLS13's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 16
From: Montreal
ok new mission...

im looking for 220-250ish WHEEL horse power...

any suggestions without having to change turbo?
Old Jun 2, 2009 | 07:32 AM
  #10  
shaban's Avatar
Contributing Member
 
Joined: May 2007
Posts: 1,188
From: virginia
Originally Posted by shaban
FMIC
Full 3" Exhaust
Boost Controller - 14psi
.
Old Jun 2, 2009 | 07:34 AM
  #11  
240smoke's Avatar
Contributing Member
 
Joined: Jul 2008
Posts: 1,152
From: Cleveland Ohio
^Name:  werd.gif
Views: 32
Size:  607 Bytes
Old Jun 16, 2009 | 01:39 PM
  #12  
jcl666's Avatar
Registered User
 
Joined: Jun 2005
Posts: 97
From: canada
my freind has a stock sr20det with 550cc injectors , z32 maf , and gt2871r ar.64 garrett turbo , 3inch exhaust , syline gtr fmic , and has 307 whp dyno , and it is a daily driven car, motors runs fine quick spool , if you cant pics and video i could upload some
Old Oct 5, 2009 | 02:35 PM
  #13  
rakooda's Avatar
Registered User
 
Joined: Oct 2009
Posts: 6
From: So. Cal
I think another important question is how much are you willing to spend? Most of the suggestions are moderate in price and wont kill you too much. But you can easily spend way more than whats expected on just a select few parts. So before anything, you should figure out what your budget is, then move forward from there. That would be just my .02 cents =) Good luck on hitting your numbers though!
Old Oct 5, 2009 | 02:35 PM
  #14  
rakooda's Avatar
Registered User
 
Joined: Oct 2009
Posts: 6
From: So. Cal
annnd I just realized I bumped a thread that is 4 months old -.-. LOL GG =T
Old Oct 5, 2009 | 04:01 PM
  #15  
240smoke's Avatar
Contributing Member
 
Joined: Jul 2008
Posts: 1,152
From: Cleveland Ohio
hmm... clutch is another one.

Thread Tools
Search this Thread

All times are GMT -7. The time now is 03:43 AM.