Widest wheels on a 5 bolt '97 240?
#2
You can fit 9s in the front...possibly have to roll/pull the fender.
10" to 10.5" in the rear....MIGHT have to roll/pull fenders...matters on how the offset is. You can also run some negative camber and that can take care of the rolling of the fender....possibly.
10" to 10.5" in the rear....MIGHT have to roll/pull fenders...matters on how the offset is. You can also run some negative camber and that can take care of the rolling of the fender....possibly.
#3
Originally posted by -HyJynX-
You can fit 9s in the front...possibly have to roll/pull the fender.
10" to 10.5" in the rear....MIGHT have to roll/pull fenders...matters on how the offset is. You can also run some negative camber and that can take care of the rolling of the fender....possibly.
You can fit 9s in the front...possibly have to roll/pull the fender.
10" to 10.5" in the rear....MIGHT have to roll/pull fenders...matters on how the offset is. You can also run some negative camber and that can take care of the rolling of the fender....possibly.
#6
Originally posted by Catharsis
i would not stagger sizes personally on a S chassis. with an s14 you can do 10j's are all 4 corners you will need to roll/pull the fenders a bit but its free or cheap to do
i would not stagger sizes personally on a S chassis. with an s14 you can do 10j's are all 4 corners you will need to roll/pull the fenders a bit but its free or cheap to do
#8
Originally posted by -HyJynX-
Matters on if its a deep dish rim, if so how deep or its not deep.
Matters on if its a deep dish rim, if so how deep or its not deep.
the offset matters on
1) If its a deep dish
ex.
If so how deep it is(the farther in it is the lower the offset) Sorry I'm not explaning it well....I suck at explaning things
Last edited by -HyJynX-; 06-16-2004 at 08:48 PM.
#9
Originally posted by Catharsis
i would not stagger sizes personally on a S chassis. with an s14 you can do 10j's are all 4 corners you will need to roll/pull the fenders a bit but its free or cheap to do
i would not stagger sizes personally on a S chassis. with an s14 you can do 10j's are all 4 corners you will need to roll/pull the fenders a bit but its free or cheap to do
if you go too staggered you are going to hurt performance. best set up is 9" rear and 8.5" front