Z32 brake upgrade issues. Spongy brakes.
#18
I skimmed through the thread one more time.
I couldn't see if you stated that the brakes were new or used.
If used send em back where they came from.
You shouldn't be getting any spongy feeling with a non ABS.
You are using a DOT4 or higher like you are suppose to and I can't help with this problem.
If it's used the rubber seals could be worn around the pistons.
If they are new you just have an awful lot of air in the line.
I couldn't see if you stated that the brakes were new or used.
If used send em back where they came from.
You shouldn't be getting any spongy feeling with a non ABS.
You are using a DOT4 or higher like you are suppose to and I can't help with this problem.
If it's used the rubber seals could be worn around the pistons.
If they are new you just have an awful lot of air in the line.
#20
before the shop installed Z32 it was really spongy. after he installed the z32 bmc he bleed the system starting w/ Z32 bmc then he bleed the calipers and now it is really firm have about an inch of play b4 the brakes start to grab rotor
Thread
Thread Starter
Forum
Replies
Last Post
japanesenut
Show and Shine
5
03-31-2010 04:02 AM
aallbbeerrttttt
Suspension, Chassis, and Brakes
10
01-12-2006 02:09 PM
silviadriver
Private For Sale / Wanted
5
03-02-2005 08:15 PM
Jedi Mind Gamez
Suspension, Chassis, and Brakes
5
10-01-2004 11:17 AM