SR20DET - Definately NOT Impressed
#181
YEAH THE RB20 IS MORE LIKE:
GET CLIP
SWAP R32 TACH INTO S13 GAUGE CLUSTER
SWAP KA TRANNY SENSORS ONTO THE RB TRANNY
SWAP KA TEMP SENSOR ONTO RB MOTOR
SPLICE 10 WIRES (FOR COMPLETE WORKING CLUSTER)
ADD ELECTRIC FANS
CUT HOOD SKELETON (A-FRAME)
ROTATE STEERING RACK FORWARD TO CLEAR DUMPPIPE
STOCK DS WORKS
TRANNY GOES RIGHT IN
GET CLIP
SWAP R32 TACH INTO S13 GAUGE CLUSTER
SWAP KA TRANNY SENSORS ONTO THE RB TRANNY
SWAP KA TEMP SENSOR ONTO RB MOTOR
SPLICE 10 WIRES (FOR COMPLETE WORKING CLUSTER)
ADD ELECTRIC FANS
CUT HOOD SKELETON (A-FRAME)
ROTATE STEERING RACK FORWARD TO CLEAR DUMPPIPE
STOCK DS WORKS
TRANNY GOES RIGHT IN
#182
MInes better than yours, yours is better than mine, mine was easier or cheaper or whatever. Dead horse - BEAT IT BEAT IT! YEAH!
Just do it and be happy with it. Still not satisfied- wack off
Just do it and be happy with it. Still not satisfied- wack off
#183
Originally posted by xjon
MInes better than yours, yours is better than mine, mine was easier or cheaper or whatever. Dead horse - BEAT IT BEAT IT! YEAH!
Just do it and be happy with it. Still not satisfied- wack off
MInes better than yours, yours is better than mine, mine was easier or cheaper or whatever. Dead horse - BEAT IT BEAT IT! YEAH!
Just do it and be happy with it. Still not satisfied- wack off
Originally posted by PROJECTRB240SX
YEAH THE RB20 IS MORE LIKE:
GET CLIP
SWAP R32 TACH INTO S13 GAUGE CLUSTER
SWAP KA TRANNY SENSORS ONTO THE RB TRANNY
SWAP KA TEMP SENSOR ONTO RB MOTOR
SPLICE 10 WIRES (FOR COMPLETE WORKING CLUSTER)
ADD ELECTRIC FANS
CUT HOOD SKELETON (A-FRAME)
ROTATE STEERING RACK FORWARD TO CLEAR DUMPPIPE
STOCK DS WORKS
TRANNY GOES RIGHT IN
YEAH THE RB20 IS MORE LIKE:
GET CLIP
SWAP R32 TACH INTO S13 GAUGE CLUSTER
SWAP KA TRANNY SENSORS ONTO THE RB TRANNY
SWAP KA TEMP SENSOR ONTO RB MOTOR
SPLICE 10 WIRES (FOR COMPLETE WORKING CLUSTER)
ADD ELECTRIC FANS
CUT HOOD SKELETON (A-FRAME)
ROTATE STEERING RACK FORWARD TO CLEAR DUMPPIPE
STOCK DS WORKS
TRANNY GOES RIGHT IN
Wait a sec... the RB20's being referenced in this thread MUST come from an R32? Or can it be from another Skyline? R32's were made from 89-94... which would mean putting a 10 year old engine into my 9 year old car LOL
Last edited by l2aine; 04-01-2004 at 11:36 AM.
#184
RB20DETS ONLY CAME IN R32'S WHEN THEY WERE PUT IN SKYLINES. YOU WILL AHVE TO BUY ELECTRIC FANS FOR ANY OF THE RB SWAPS.... OR YOU CAN USE 2 OF THE A/C AUXILLARY FANS.
#186
Originally posted by PROJECTRB240SX
SWAP R32 TACH INTO S13 GAUGE CLUSTER
SWAP KA TRANNY SENSORS ONTO THE RB TRANNY
SWAP KA TEMP SENSOR ONTO RB MOTOR
SPLICE 10 WIRES (FOR COMPLETE WORKING CLUSTER)
SWAP R32 TACH INTO S13 GAUGE CLUSTER
SWAP KA TRANNY SENSORS ONTO THE RB TRANNY
SWAP KA TEMP SENSOR ONTO RB MOTOR
SPLICE 10 WIRES (FOR COMPLETE WORKING CLUSTER)
Urm...does the R32 tach have the same sweep as the S13 tach, and finally how would one go about running the Skyline cluster?
Originally posted by PROJECTRB240SX
ROTATE STEERING RACK FORWARD TO CLEAR DUMPPIPE
ROTATE STEERING RACK FORWARD TO CLEAR DUMPPIPE
#187
Originally posted by -HyJynX-
Raine, just stick with the KA lol jeez
Raine, just stick with the KA lol jeez
#188
Originally posted by l2aine
Heh sorry... my KA is dying, and I like the idea of having a turbocharged factory engine... If it seems like I'm anti RB from my previous posts, then think what you want. The idea of having an engine from Nissans "god car" (Skyline, duh!) if something I'd look forward too... but not if it's going to be more of a hassle than an SR.
Heh sorry... my KA is dying, and I like the idea of having a turbocharged factory engine... If it seems like I'm anti RB from my previous posts, then think what you want. The idea of having an engine from Nissans "god car" (Skyline, duh!) if something I'd look forward too... but not if it's going to be more of a hassle than an SR.
#189
I used the ka lower harness and spliced the rb starter and alternator plugs onto it. I then swapped the ka sensors into the transmission.
Rotating the rack forward just allows alittle more clearance.... its safe enough to me and I've had my cars sideways and taking hard turns no problems what-so-ever.
The rb20 tach is a bit different in design so if your a order freak this isn't for you. As for running the skyline cluster I honestly don't know because I have never done it.
Rotating the rack forward just allows alittle more clearance.... its safe enough to me and I've had my cars sideways and taking hard turns no problems what-so-ever.
The rb20 tach is a bit different in design so if your a order freak this isn't for you. As for running the skyline cluster I honestly don't know because I have never done it.
#190
Originally posted by PROJECTRB240SX
I used the ka lower harness and spliced the rb starter and alternator plugs onto it. I then swapped the ka sensors into the transmission.
Rotating the rack forward just allows alittle more clearance.... its safe enough to me and I've had my cars sideways and taking hard turns no problems what-so-ever.
The rb20 tach is a bit different in design so if your a order freak this isn't for you. As for running the skyline cluster I honestly don't know because I have never done it.
I used the ka lower harness and spliced the rb starter and alternator plugs onto it. I then swapped the ka sensors into the transmission.
Rotating the rack forward just allows alittle more clearance.... its safe enough to me and I've had my cars sideways and taking hard turns no problems what-so-ever.
The rb20 tach is a bit different in design so if your a order freak this isn't for you. As for running the skyline cluster I honestly don't know because I have never done it.
BTW PROJECTRB, I'm not busting your ***** in this thread man... all your posts have been really helpful
#191
I'd like to know that too, if the tach can be adapted or maybe the stock face used with the R32 tach mechanism and needle? I mean with a little dremeling, super glue, and some small screws should be able to put something together....
#192
Originally posted by -HyJynX-
A 4 cylinder TT....doesnt sound right at all
A 4 cylinder TT....doesnt sound right at all
The Cosworth Escort (the rally edition of the ford escort) is a awd i4 thats twin turbo (some times gets quad turboed) and makes 400hp 450tq at the wheels.. unfortuneatly its only sold in euro land...
#193
Originally posted by irax
i didnt read ahead if anyone has mentioned this but...
The Cosworth Escort (the rally edition of the ford escort) is a awd i4 thats twin turbo (some times gets quad turboed) and makes 400hp 450tq at the wheels.. unfortuneatly its only sold in euro land...
i didnt read ahead if anyone has mentioned this but...
The Cosworth Escort (the rally edition of the ford escort) is a awd i4 thats twin turbo (some times gets quad turboed) and makes 400hp 450tq at the wheels.. unfortuneatly its only sold in euro land...
#194
the skyline cluster does fit in the s13 and s14... the r33 fits almost perfectly in the s14, its just the mounting locations aren't the same...
#195
Originally posted by l2aine
What model years are you talking? I tried to look for some info but the closest thing I found was an Escort Cosworth with a "twin"-core intercooler most of the ones I saw info on (from way back to the 80's) were pretty much all single turbo
What model years are you talking? I tried to look for some info but the closest thing I found was an Escort Cosworth with a "twin"-core intercooler most of the ones I saw info on (from way back to the 80's) were pretty much all single turbo
Ain't illiteracy great?